CARBON FIBER REINFORCED LAMINATED TIMBER BEAMS STUDIED USING VIC-3D DIGITAL OPTICAL SYSTEM
Abstract
The paper presents results of experimental research carried out into the static bending of reinforced laminated beam. The beam is reinforced with carbon tape placed in the two interlamellar bottom layers. Tests were carried out on a hydraulic press. Deformations and displacements online measurements are provided by the VIC-3D digital optical system based on the principle of correlation between digital stereoscopic images. Linear and shear strains are determined with the frequency of 1 Hz. The obtained images of the stress distribution of the visible beam surface reflect the stage of elastic and elastoplastic deformation. The possibility of using the VIC-3D digital optical system for determination and destruction of laminated beams is shown in this paper.
About the Authors
DMITRII G. Kopanitsa
Tomsk State University of Architecture and Building
Russian Federation
Russian Federation
DIANA V. Loskutova
Tomsk State University of Architecture and Building
Russian Federation
Russian Federation
ARTEM I. Danilson
Tomsk State University of Architecture and Building
Russian Federation
Russian Federation
References
1. Koval'chuk L.M., Preobrazhenskaja K.A., Slavik Ju.Ju. Prochnost' kleenyh balok so slojami sostavnogo sechenija [Laminated beam strength with sectional layers]. News of Higher Educational Institutions. Construction and Architecture. 1982. No. 5. Pp. 1–5.(rus)
2. Kvasnikov E.H. O naprjazhennom sostojanii drevesiny pri izgibe. [Flexural stress state]. Proc. 30th Sci. Conf. ‘Engineering Structures’. Leningrad : LISI Publ., 1972. Pp. 106–114.(rus)
3. Delova M.I. Deformirovanie izgibaemyh kleenyh derevjannyh jelementov pri staticheskom nagruzhenii: Avtoref. dis. kand. tehn. Nauk [Deformation of bending laminated elements at static load. PhD abstract]. Kursk : GTU Publ., 1997. No. 21. P. 1. (rus)
4. Fursov V.V., Purjazdanhah M. Jeksperimental'noe issledovanie naturnyh balok ih kleenoj drevesiny [Experimental research of laminated beams]. Shimanovskii UISK Proceedings. 2013. No. 12. Pp. 71–77.(rus)
5. Antakov A.B., Antakov I.A. Jeksperimental'nye issledovanija izgibaemyh jelementov s polimerkompozitnoj armaturoj [Experimental research of bending polymer-reinforced elements]. KGASU Publ., 2014. No. 3. Pp. 7–13.(rus)
6. Roshhina S.I. Armirovanie – jeffektivnoe sredstvo povyshenija nadezhnosti i dolgovechnosti derevjannyh konstrukcij [Reinforcement as effective improvement of safety and durability of timber structures]. Lesnoy Zhurnal. 2008. No. 2. Pp.71–74.(rus)
Review
For citations:
Kopanitsa D.G., Loskutova D.V., Danilson A.I. CARBON FIBER REINFORCED LAMINATED TIMBER BEAMS STUDIED USING VIC-3D DIGITAL OPTICAL SYSTEM. Vestnik of Tomsk state university of architecture and building. 2015;(4):135-142. (In Russ.)
Views:
593
Email this article 