Technological Properties of Claystone-Like Clays in Clinker Production
Abstract
The paper presents physicotechnical properties of different types of clinker. A comparison is given for other similar materials and products. The raw material supplies basis is described for the linker production. It is shown than the use of claystone-like clays is prospective for clinker production. The chemical and mineralogical composition of the structure is described as well as the technological properties of obtained products. The production technology is suggested for clinker production on the basis of claystone-like clays.
References
1. Lysenko E.I. Tehnologija keramicheskih materialov i izdelii [Technology of ceramic materials and products]. Rostov-on-Don : RSUCE Publ., 1998. P. 126. (rus)
2. Ezerskij V. A. Klinker. Tehnologija i svojstva [Clinker. Technology and properties]. Construction Materials. 2011. No. 4. Pp. 79–81. (rus)
3. Osipov V.I., Sokolov V.N. Glinyiihsvojstva. Sostav, stroenie i formirovanie svojstva [Clays and their properties. Structural composition and formation of properties]. Moscow : GEOS Publ., 2013. Pp. 576. (rus)
4. Kotljar A.V., Talpa B.V. Kamnevidnye glinistye porody Vostochnogo Donbassa - perspektivnoe syr'io dlia proizvodstva stenovoi keramiki [Claystone breeds of East Donbass is perspective raw materials production of wall ceramics]. Proc. 10th Int. Sci. Conf. of Students and Young Scientists ‘Actual Problems of Earth Sciences’. Rostov-on-Don : SFU Publ., 2015. Pp. 49–51. (rus)
5. Kotljar A.V., Talpa B.V. Osobennosti argillitopodobnyh glin iuga Rossii kak syr'Ia dlia proizvodstva klinkernogo kirpicha [Argillaceous-like clays of the South of Russia as raw materials for brick production] Proc. 10th Int. Sci. Conf. of Students and Young Scientists ‘Actual Problems of Earth Sciences’. Rostov-on-Don : SFU Publ., 2015. Pp. 51–53. (rus)
6. Kotljar V.D., Kozlov A.V., Kotljar A.V., Teriohina U.V. Osobennosti kamnevidnyh glinistyh porod Vostochnogo Donbassa kak syr'ia dlia proiz-vodstva stenovoi keramiki [Argillaceouslike clays of East Donbass as raw materials for production of wall ceramics]. Scientific and Technical Journal on Construction and Architecture. 2014. No. 10. Pp. 95–105. (rus)
7. Talpa B.V., Kotljar A.V. Mineral'no-syr'evaia baza litificirovannyh glinistyh porod Iuga Rossii dlia proizvodstva stroitel'noi keramiki [Mineral resources the of clay breeds of the South Russia for production of construction ceramics]. Construction Materials. 2015. No. 4. Pp. 31–33. (rus)
8. Kotljar V.D, Teriohina U.V., Kotljar A.V. Metodika ispytanii kamnevidnogo syr'ja dlia proizvodstva stenovyh izdelij kompressionnogo formovania [Tests of stone-like raw materials for wall production]. Construction materials. 2014. No. 4. Pp. 24–27. (rus)
9. Hmelevcov A.A. Usloviia formirovaniia I specificheskie svojstva argillitopodobnyh glin rajona g. Bol'shoi Sochi [Conditions of formation and specific properties of claystone in Bol'shoi Sochi]. Inzhenernyi vestnik Dona. 2010. No. 3. Available at: www.ivdon.ru/ Last visited in Nov. 2015. (rus)
10. Kara-sal B.K., Kotel'nikov V.I., Sapelkina T.V. Poluchenie keramicheskogo stenovogo materiala iz vskryshnyh porod ugleobogashheniia [Ceramic wall material obtained from overburden breeds of coal preparation]. Natural and Technical Sciences. 2015. No. 2. Pp. 160–163. (rus)
11. Stolboushkin A.U., Storozhenko G.I. Othody ugleobogashheniia kak syr'evaiai i energeticheskaia baza zavodov keramicheskih stenovyh materialov [Coal preparation waste as raw and power supply sources for wall ceramics plants]. Construction Materials. 2011. No. 4. Pp. 43–46. (rus)
12. Stolboushkin A.U. Stenovye keramicheskie materialy matrichnoi struktury na osnove obogashheiiaj othodov uglistyh argillitov [Wall ceramic materials of matrix structure based on enrichment of carbonaceous claystone waste]. News of Higher Education Institutions. Construction. 2013. No. 2–3. Pp. 28–36. (rus)
Review
For citations:
Kotlyar A.V. Technological Properties of Claystone-Like Clays in Clinker Production. Vestnik of Tomsk state university of architecture and building. 2016;(2):164-175. (In Russ.)
Views:
610
Email this article 