IMPROVEMENT OF BEARING CAPACITY design technique for INJECTION PILES IN SOFT CLAY SOILS
Abstract
The paper presents the improved design method of bearing capacity for injection piles based on data obtained from the injector indentation. Field experiments and numerical simulation are carried out using the software package PLAXIS 3D. The transition ratios between the soil resistance to the injector indentation and estimated soil resistance under the lower end of the injection piles are determined in this paper. The specific-conditions-of-use factor of the lateral surface of the injection pile is obtained herein. The comparative analysis is presented for the experimental and theoretical findings.
References
1. Polishchuk A.I., Petuhov A.A., et al. Pat. Rus. Fed. N 2238366, IPC E 02 D 5/34. Sposob ustrojstva in"ekcionnoj svai [Injection pile arrangement method]. Appl. 04.03.2003. Publ. 20.10.2004.
2. Polishchuk A.I., Tarasov A.A., Shalginov R.V. Pat. Rus. Fed. N 87718, IPC 7 E 02 D 5/34. In"ektsionnaya svaya [Injection pile]. Appl. 11.01.2009. Publ. 20.10.2009.
3. Polishchuk A.I., Tarasov A.A. Pat. Rus. Fed. N 129522, IPC 7 E 02 D 5/34. In"ekcionnaya svaya dlya slabyh glinistyh gruntov [Injection pile for soft soils]. Publ. 15.01.13.
4. Polishchuk A.I., Tarasov A.A., Petuhov A.A. Opredelenie usiliya vdavlivaniya in"ektora in"ekcion-nyh svaj v glinistyh gruntah [Determination of indentation load of injection piles in clay soils]. Vestnik TSUAB, 2013. No. 2. Pp. 346–354. (rus)
5. Polishchuk A.I., Tarasov A.A. Ocenka nesushchej sposobnosti in"ekcionnyh svaj po dan-nym staticheskogo zondirovaniya [Load-bearing capacity of injection piles detected by static penetration test]. Proc. Int. Sci. Conf. ‘Soil Mechanics in Geotechnology and foundation engineering. 2015. Pp. 419–424.(rus)
6. Rukovodstvo pol'zovatelya po PLAXIS [PLAXIS manual]. St-Petersburg : NIP-Informatika Publ., 2005. 207 p. (rus)
7. Dalmatov B.I. Mekhanika gruntov, osnovaniya i fundamenty (vklyuchaya spetsial'nyi kurs inzhenernoi geologii) [Soil mechanics and foundation engineering]. Leningrad : Stroyizdat Publ., 1988. 415 p.(rus)
8. Petuhov A.A. Sovershenstvovanie sposoba ustroistva in"ektsionnykh svai v slabykh glinistykh gruntakh dlya uslovii rekonstruktsii zdanii: avtoref. dis. kand. tekhn. Nauk [Injection pile arrangement improvement in soft soils for building reconstruction. PhD abstract]. Tomsk : 2006. 23 p.(rus)
9. Shalginov R.V. Sovershenstvovanie metoda raschyota in"ekcionnyh svaj v glinistyh gruntah dlya fundamentov rekonstruiruemyh zdanij: avtoref. dis. kand. tekhn. nauk. – Tomsk, 2010. – 22 p.(rus)
10. Shamenkov Yu.M., Glazychev A.O. Raschet buronabivnykh svai v glinistykh gruntakh po dannym staticheskogo zondirovaniya [Bored pile design in clay soils using static penetration test]. Osnovaniya i fundamenty, podzemnye sooruzheniya, 2012. No. 3. Pp. 81–85. (rus)
Review
For citations:
Tarasov A.A. IMPROVEMENT OF BEARING CAPACITY design technique for INJECTION PILES IN SOFT CLAY SOILS. Vestnik Tomskogo gosudarstvennogo arkhitekturno-stroitel'nogo universiteta. JOURNAL of Construction and Architecture. 2015;(5):225-233. (In Russ.)
Views:
792
JATS XML
Email this article 