Preview

Vestnik Tomskogo gosudarstvennogo arkhitekturno-stroitel'nogo universiteta. JOURNAL of Construction and Architecture

Advanced search

Crack modeling of metal rod eigen-frequencies

https://doi.org/10.31675/1607-1859-2021-23-2-56-64

Abstract

The paper presents the development of approaches to the crack detection in metal rod structures based on the analysis of the lowest eigen-frequency modes. Full-scale experiments and numerical calculations are carried out, and the obtained results are compared. A vibration analyzer is used for full-scale experiments, and numerical calculations are performed by using Autodesk Inventor. With regard to the internal friction, the antinodes of various vibration forms were identified using a specially developed program. The model includes sensors for the the field experiment as masses affecting the frequency-response characteristics. The dependences are obtained for eigen-frequencies in the presence of cracks and for the crack locations. The polynomial dependences of the crack location on the lowest eigen-frequency modes of the rod can be used to analyze the crack position of in cantilever beams.

About the Authors

A. A. Gavrilov
Orenburg State University
Russian Federation

Aleksandr A. Gavrilov, PhD

Orenburg, Pobedy Ave, 13



G. I. Grebenyuk
Tomsk State University of Architecture and Building
Russian Federation

Grigorii I. Grebenyuk, DSc, Professor

Tomsk, Solyanaya Sq., 2



V. I. Maksak
Tomsk State University of Architecture and Building
Russian Federation

Vladislav I. Maksak, DSc, Professor

Tomsk, Solyanaya Sq., 2



N. A. Morozov
Orenburg State University
Russian Federation

Nikolai A. Morozov, PhD, A/Professor

Orenburg, Pobedy Ave, 13



References

1. Fernández-Sáez J., Morassi A., Pressacco M., Rubio L. Unique determination of a single crack in a uniform simply supported beam in bending vibration. Journal of Sound and Vibration. 2017. V. 371. Pр. 94–109.

2. Akhtyamov A.M., Karimov A.R. Diagnostirovanie mestopolozheniya treshchiny po sobstvennym chastotam prodol'nykh kolebanii [Crack location diagnosis by natural frequencies of longitudinal oscillations]. Tekhnicheskaya akustika. 2010. V. 10. P. 3. (rus)

3. Chuanchuan Hou, Yong Lu. Identification of cracks in thick beams with a cracked beam element model. Journal of Sound and Vibration. 2016. V. 385. Pр. 104–124.

4. Derbasov A.N. Konechno-elementnaya vibrodiagnostika konstruktsii s treshchinoi [Finite element vibration analysis of cracked structure]. Transportnye sistemy. 2017. No. 1 (4). Pp. 49–55. (rus)

5. Khassetarash А., Hassannejad R. Energy dissipation caused by fatigue crack in beam-like cracked structures. Journal of Sound and Vibration. 2016. V. 363. Pр. 247–257.

6. Gavrilov А., Grebenyuk G., Morozov N., Grehov A. Free Vibrations of thin-walled box-section bars allowing for shear strains. International Journal of Engineering & Technology. 2018. V. 7. No. 2.13. Pp. 7–12.


Review

For citations:


Gavrilov A.A., Grebenyuk G.I., Maksak V.I., Morozov N.A. Crack modeling of metal rod eigen-frequencies. Vestnik Tomskogo gosudarstvennogo arkhitekturno-stroitel'nogo universiteta. JOURNAL of Construction and Architecture. 2021;23(2):56-64. (In Russ.) https://doi.org/10.31675/1607-1859-2021-23-2-56-64

Views: 506


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 1607-1859 (Print)
ISSN 2310-0044 (Online)