THE INFLUENCE OF ASH MICROSPHERES ON CERAMIC PROPERTIES
https://doi.org/10.31675/1607-1859-2020-22-2-112-119
Abstract
The paper deals with the problem of producing heat-insulating ceramic bricks using ash microspheres. The influence of the main technological factors on the ceramic material properties and physicochemical processes in composition preparation is investigated. Clay raw materials of the Verkhovaya deposit of the Tomsk region and ash hollow microspheres of the Belovskaya power plant are studied. It is found that 80 % ash microspheres in the mixture composition reduces the average density by 50 % and water absorption by 28 %; and increases thermal conductivity by 50 %, average compressive strength by 22 % and flexural strength by 30 %. According to the Xray analysis, laboratory samples represent the following crystalline phases: quartz, gehlenite, albite, kyanite, anorthite- and mullite-like compounds. The presence of these minerals in the composition improves the strength properties of the resulting calcined compositions. Microscopy observations show that the structure of the samples is mostly uniform, with a significant number of closed and half-closed pores, that are difficult to reach and inaccessible to water. This factor significantly affects the frost resistance of the product, causing stress relaxation arising from water frozen in pores. As a result, the obtained laboratory samples have the improved thermophysical quality.
About the Authors
N. K. Skripnikova
Tomsk State University of Architecture and Building
Russian Federation
Russian Federation
Nelli K. Skripnikova, DSc, Professor
2, Solyanaya Sq., 634003, Tomsk
D. K. Grigorevskaya
Tomsk State University of Architecture and Building
Russian Federation
Russian Federation
Dar'ya K. Grigorevskaya, Undergraduate
2, Solyanaya Sq., 634003, Tomsk
M. A. Semenovykh
Tomsk State University of Architecture and Building
Russian Federation
Russian Federation
Mark A. Semenovykh, Research Assistant
2, Solyanaya Sq., 634003, Tomsk
References
1. Anan'ev A.I., Anan'ev A.A. Dolgovechnost' i energoeffektivnost' naruzhnykh sten iz oblegchennoi kirpichnoi kladki [Durability and energy efficiency of lightweight masonry exterior walls]. ACADEMIA. Arkhitektura i stroitel'stvo. 2010. No. 3. (rus)
2. Salakhov A.M., Morozov V.P., Tuktarov G.R. Sovershenstvovanie tekhnologii proizvodstva stroitel'noi keramiki i rasshirenie nomenklatury izdelii [Improvement of production technology of building ceramics and expanding the range of products]. Steklo i keramika. 2005. No. 3. P. 23. (rus)
3. Stolboushkin, A.Yu., Fomin A.A., Sharomazov V.A., Semin A.P. Perspektivnye razrabotki tekhnologii keramicheskikh stenovykh materialov iz nizkokachestvennogo syr'ya [Advanced production technology of ceramic wall materials using low-quality raw materials]. Vestnik Tuvinskogo gosudarstvennogo universiteta. Tekhnicheskie i fiziko-matematicheskie nauki.2017. V. No. 3 (34). Pp. 107−118. (rus)
4. Drozhzhin B.C. (Ed.) Polye mikrosfery v zolakh unosa elektrostantsii: sbornik nauchnykh statei [Hollow microspheres in ashes of ablation of plants]. Sarov, 2009. 125 S. (rus)
5. Joonwon Bae. Fabrication of carbon microcapsules containing silicon nanoparticles – carbon nanotubes nanocomposite by sol–gel method for anode in lithium ion battery. Journal of Solid State Chemistry. 2011. V. 184. No. 7. Pp. 1749–1755.
6. Drozhzhin V.S., Kuvaev, M.D., Pikulin I.V., et al. Protsessy obrazovaniya i osnovnye svoistva polykh alyumosilikatnykh mikrosfer v zolakh unosa teplovykh elektrostantsii [Formation and main properties of hollow aluminosilicate microspheres in fly ashes produced by thermal power plants]. Khimiya tverdogo topliva. 2008. No. 2. Pp. 53−66. (rus)
7. Sundaram S.K., Fox Kevin, Ohji Tatsuki, Hoffman E. Titanium-dioxide-coated silica microspheres for high-efficiency dye-sensitized solar cell. Advances in Materials Science for Environmental and Nuclear Technology II. 2011. V. 227. Pp. 27–32.
8. Todea M. Frentiu B., Turcu R.F.V., Simon S. Structural properties of yttrium aluminosilicates microspheres. Journal of Physics and Chemistry of Solids. 2011. V. 72. No. 3. Pp. 164–168.
9. Skripnikova N.K., Yuriev E.Y. Stroitel'nye keramicheskie izdeliya na osnove mikrodispersnykh zoloshlakovykh soedinenii [Ceramic building products based on fine ash compounds]. Vestnik of Tomsk State University of Architecture and Building. 2011. No. 4. Pp. 127−131. (rus)
10. Gladkikh I. Otsenka kachestva tekhnogennogo syr'ya Kuzbassa dlya proizvodstva ogneupornykh i teploizolyatsionnykh materialov [Quality of Kuzbass technogenic raw materials for refractory and insulating material production]. Ekologiya i promyshlennost' Rossii. 2016. V. 20. No. 7. Pp. 13−17. (rus)
11. Vakulova T.V., Habas T.A., Revva I.B., Pavlov I.A. Teploizolyatsionnye keramicheskie materialy s nanoporistoi strukturoi, izgotovlennye s ispol'zovaniem zolosoderzhashchikh otkhodov TETs [Ash-containing ceramic insulating material production]. Novye ogneupory. 2014. V. 12. No. 6. (rus)
12. Kupryakhin A.N. Poluchenie teploizolyatsionno-konstruktsionnykh materialov s dobavleniem tekhnogennykh otkhodov [Insulating material production with addition of industrial wastes]. Ogneupory i tekhnicheskaya keramika. 2004. No. 2. Pp. 20−22. (rus)
13. Skripnikova N.K., Litvinova V.A., Volokitin G.G., Lutsenko A.V., Volokitin O.G., Semenovykh M.A. Obzhigovye stroitel'nye materialy na osnove alyumosilikatnykh otkhodov neftedobyvayushchei promyshlennosti [Fired construction materials based on alumino-silicate wastes of oil-extracting industry]. Vestnik of Tomsk State University of Architecture and Building. 2017. No. 2. Pp. 141−147. (rus)
Review
For citations:
Skripnikova N.K., Grigorevskaya D.K., Semenovykh M.A. THE INFLUENCE OF ASH MICROSPHERES ON CERAMIC PROPERTIES. Vestnik Tomskogo gosudarstvennogo arkhitekturno-stroitel'nogo universiteta. JOURNAL of Construction and Architecture. 2020;22(2):112-119. (In Russ.) https://doi.org/10.31675/1607-1859-2020-22-2-112-119
Views:
710
Email this article 