WELDING OF METAL BRIDGE SPANS
Abstract
The paper deals with the development and application of a new technique of welding large steel plates of bridges. The technological procedure of this technique as applied to regular bridges. It is found that the use of a glass substrate does not significantly affect mechanical properties of both welds and metal near them. The reliability and usefulness of this technique is proved on the real bridge erected over the river Chulym. The process of balancing the residual stresses in the thermal effect zone is experimentally proved during welding work.
About the Authors
VASILII N. Muzalev
Tomsk State University of Architecture and Building
Russian Federation
Russian Federation
BORIS S. Semukhin
Tomsk State University of Architecture and Building; Institute of Strength Physics and Materials Science SB RAS
Russian Federation
Russian Federation
References
1. Lu Zhanpeng, Shoji Tetsuo, Meng Fanjiang, Xue He, Qiu Yubing, Takeda Yoichi, Negishi Koji. Characterization of microstructure and local deformation in 316NG weld heat-affected zone and stress corrosion cracking in high temperature water. Corrosion Science. 2011. V. 53. No. 5. Рp. 1916–1932.
2. Ficquet X., Smith D.J., Truman C.E., Kingston E.J., R.J. Dennis Measurement and prediction of residual stress in a bead-on-plate weld benchmark specimen. Int. J. Pressure Vessels & Piping. 2009. V. 86. No. 1. Рp. 20–30.
3. Vasantharaja P., Maduarimuthu V., Vasudevan M., Palanichamy P. Assessment of residual stresses and distortion in stainless steel weld joints. Materials & Manufacturing Processes. 2012. V. 27. No. 12. Рp. 1376–1381.
4. Coules H.E., Colegrove P., Cozzolino L.D., Wen S.W., Kelleher J.F. High pressure rolling of low carbon steel weld seams: Pt 2. Roller geometry and residual stress. Science & Technology of Welding & Joining. 2013. V. 18. No. 1. Рp. 84–90.
5. Jurcius A., Valiulis A.V., Černašėjus O., Kurzydlowski K.J., Jaskiewicz A., Lech-Grega M. Influence of vibratory stress relief on residual stresses in weldments and mechanical properties of structural steel joint. Journal of Vibroengineering. 2010. V. 12 No. 1. Рp. 133–141.
6. Zuev L.B., Semukhin B.S. Some acoustic properties of a deforming medium. Philos. Mag. A. 2002. V. 82. No. 6. Рp. 1183–1193.
7. Semukhin B.S., Zuev L.B., Lunev A.G. Use of acoustic parameter measurements for evaluating the reliability criteria of machine parts and metalwork. Proc. ISMTII-2009. 2009. No. 3. Р. 44–48.
8. Semukhin B.S. Determination of strains near the welded seams engineering. 2010. V. 2. No. 12. Рp. 950–952.
9. Zuev L.B., Semukhin B.S., Lunev A.G. The use of measurement of velocity of ultrasound to determine the stress-strain state of metal articles. Measurement Techniques. 2010. V. 53. No. 4. Рp. 439–443.
Review
For citations:
Muzalev V.N., Semukhin B.S. WELDING OF METAL BRIDGE SPANS. Vestnik of Tomsk state university of architecture and building. 2015;(2):184-193. (In Russ.)
Views:
520
Email this article 