Preview

Vestnik Tomskogo gosudarstvennogo arkhitekturno-stroitel'nogo universiteta. JOURNAL of Construction and Architecture

Advanced search

Efficient Ceramics Based on Organic Waste of the Republic of Khakassia

https://doi.org/10.31675/1607-1859-2025-27-4-156-171

EDN: SBGXMZ

Abstract

The problem of accumulation of production and consumption waste is one of the most acute environmental problems of today. In Russia, a large amount of waste is generated annually, which is often stored or buried instead of being involved in an economic turnover. One of the promising areas for using industrial waste is the production of building materials.  

Purpose: The study of complex burnout additives to improve construction and technical properties of effective ceramic bricks.

Methodology: Clay, wood sawdust, technical hydrolysis lignin, fly ash are used in experi-ments. The samples are produced by semi-dry pressing. Physical and mechanical properties of products are determined according to standard methods.  

Research findings: Determination of the effect of additives on the properties of ceramic bricks. The average density, thermal conductivity and fire shrinkage of the obtained ceramic products are determined. Research findings confirm the prospects of using a complex additive of lignin with sawdust for the production of effective ceramics. In this case, the additive content should not exceed 20 % of the total ceramic mass.

About the Authors

E. E. Ibe
Khakassian Technical Institute, SibFU Affiliate
Russian Federation

Ekaterina E. Ibe, PhD, A/Professor

27, Shchetinkin Str., 655017, Abakan



S. E. Mironov
Khakassian Technical Institute, SibFU Affiliate
Russian Federation

Svyatoslav E. Mironov, Graduate Student

27, Shchetinkin Str., 655017, Abakan



G. N. Shibaeva
Khakassian Technical Institute, SibFU Affiliate
Russian Federation

Galina N. Shibaeva, PhD, A/Professor

27, Shchetinkin Str., 655017, Abakan



References

1. Anikanova L.A. Acid Fluoride in Ceramic Material Production. Vestnik Tomskog ogosudarstvennogo arkhitekturno-stroitel'nogo universiteta – Journal of Construction and Architecture. 2024; 26 (2): 148–156. DOI:10.31675/1607-1859-2024-26-2-148-156. EDN: NELLGY (In Russian)

2. Vakalova T.V., Sergeev N.P., Tolegenov D.T., Tolegenova D.Zh., Mitina N.A. Red Mud in High-Strength Ceramics Production. Vestnik Tomskogo gosudarstvennogo arkhitekturno-stroitel'nogo universiteta – Journal of Construction and Architecture. 2024; 26 (2): 171–184. DOI: 10.31675/1607-1859-2024-26-2-171-184. EDN: PUJLFN (In Russian)

3. Singh D., et al. A Comprehensive Review on Valorisation of Octal By-Product as Supplementary Admixtures in the Production of Fired and Unfired Bricks. Construction and Building Materials. 2023; 408: 133641.

4. Zavadskii V.F. Lignomineral Building Materials and Products. Novosibirsk: NGASU, 2004. 180 p. (In Russian)

5. Nikiforov Yu.E., Selivanov V.M. Hydrolytic Lignin as Raw Material for the Production of Thermal Insulation Materials. Stroitel'nye materialy i izdeliya iz mestnogo syr'ya Vostochnoi Sibiri. Krasnoyarsk, 1970; (1): 43–45. (In Russian)

6. Shibaeva G.N., Ibe E.E. Finishing and Insulating Materials Based on Local Raw Materials of the Republic of Khakassia. Abakan, 2016. 100 p. (In Russian)

7. Molokov V.S., Balabanov V.B. Influence of Hydrolytic Lignin Additives on Physical and Mechanical Properties of Asphalt Concrete Mixes. Innovatsii i investitsii. 2024; (3): 569–572. Available: https://elibrary.ru/item.asp?id=65601662 (accessed December 9, 2024). (In Russian)

8. Lyubov V.K., Tsypnyatov I.I. Improving the Efficiency of Energy Use of Biofuels. Lesnoy Zhurnal. Russian Forestry Journal. 2023; 1 (391): 172–185. Available: https://doi.org/10.37482/0536-1036-2023-1-172-185 (accessed December 9, 2024). (In Russian)

9. Beregovoi V.A., Egunov D.A., Sorokin D.S. Construction Materials and Bindings Based on Hydrolytic Lignin. Regional'naya arkhitektura i stroitel'stvo. 2017; 3 (32): 75–79. Available: https://elibrary.ru/item.asp?id=30488641 (accessed January 3, 2025). (In Russian)

10. Volochko A.T., Azarkova E.A., Khort N.A., Manak P.I. Effect of High- and Low-Calorie Burn-Out Additives on Porous Ceramics Properties. Vestnik Polotskogo gosudarstvennogo universiteta. Seriya F. Stroitel'stvo. Prikladnye nauki. 2020; 16: 47–51. Available: https://cyberleninka.ru/article/n/issledovanie-vliyaniya-vysokokaloriynyh-i-nizkokaloriynyh-vygorayuschih-dobavok-na-harakteristiki-porizovannoy-keramiki (accessed December 9, 2024). (In Russian)

11. Karasal B.K., Mongush D.S, Khoilaarak Z.K. Influence of Burnout Additive on Properties of Ceramic Products. Tekhnika i tekhnologiya. 2012; (4): 29–33. (In Russian)

12. Mavliuberdinov A.R. On Thermal Conductivity of Ceramic Hollow-Porous Materials. Izvestiya KazGASU. 2014; 4 (30): 273–277. Available: https://cyberleninka.ru/article/n/k-voprosu-izucheniya-teploprovodnosti-keramicheskih-poristo-pustotelyh-materialov (accessed December 5, 2024). (In Russian)

13. Doroganova O.V., Miroshnihenko N.A., Sverguzova C.B., Doroganova E.V. Use of Waste Sorption Material as a Burnout Additive to Ceramic Mixtures. Ekonomika stroitel'stva i prirodopol'zovaniya. 2019; 2 (71). Available: https://cyberleninka.ru/article/n/ispolzovanie-otrabotannogo-sorbtsionnogo-materiala-v-kachestve-vygorayuschey-dobavki-k-keramiches-kim-smesyam (accessed November 20, 2024). (In Russian)

14. Gostev D.V., Kryukova A.A., Izmailov A.M., Abdrakhimov V.Z. Ecological, Economic and Practical Feasibility of Using Ash Slag in Wall Material Production based on Montmorillonite Clay. Ugol'. 2023; 4 (1166). Available: https://cyberleninka.ru/article/n/ekologo-ekonomicheskaya-i-prakticheskaya-tselesoobraznost-ispolzovanie-zoloshlaka-v-proizvodstve-stenovogo-materiala-na-osnove (accessed January3, 2025). (In Russian)

15. Vitkalova I.A., Torlova A.S., Pikalov E.S., Selivanov O.G. Polymer and Glass Wastes in Production of Self-Glazing Facing Ceramics. Ekologiya i promyshlennost' Rossii. 2019; 23 (11): 38–42. Available: https://elibrary.ru/item.asp?id=41321615 (accessed December 9, 2024). (In Russian)

16. Makarov D.V., Melkonyan R.G., Suvorova O.V., Kumarova V.A. Prospects for Using Industrial Waste in Production of Ceramic Building Materials. GIAB. 2016; 5: 254–281. Available: https://cyberleninka.ru/article/n/perspektivy-ispolzovaniya-promyshlennyh-othodov-dlya-polucheniya-keramicheskih-stroitelnyh-materialov (accessed December 9, 2024). (In Russian)

17. Khomenko О., et al. Thermal Conductivity of Different Engobed Ceramic Brick. Cerâmica. 2024; 70: eZAOY1947.

18. Dele-Afolabi T.T., et al. Organic Waste-Derived Pore Formers for Macroporous Ceramics Fabrication: A Review on Synthesis, Durability Properties and Potential Applications. Materials Today Sustainability. 2024; 100824.

19. Kozlov A.I., Makhnovetskii S.I. Application of Hydrolytic Lignin as a Burnout Additive. Stroitel'nye materialy. 1960; 12. (In Russian)

20. Selivanov Yu.V., Shil'tsina A.D., Selivanov V.M., Loginova E.V., Korol'kova N.N. Composition and Properties of Ceramic Thermal Insulation Materials Made of Low-Temperature Foaming Masses Based on Clay Raw Materials. Magazine of Civil Engineering. 2012; 3 (29): 35–40. Available: https://elibrary.ru/item.asp?id=18003754 (accessed December 9, 2024). (In Russian)

21. Ibe E.E., Chekalova A.Yu., Shibaeva G.N. Porous Ceramics Based on Hydrolyzed Lignin. Inzhenernyi vestnik Dona. 2021; 7 (79): 311–319. Available: https://elibrary.ru/item.asp?id= 46459820 (accessed December 9, 2024). (In Russian)

22. Skripnikova N.K., Grigorevskaya D.K., Semenovykh M.A. The Influence of Ash Microspheres on Ceramic Properties. Vestnik Tomskogo gosudarstvennogo arkhitekturno-stroitel'nogo universiteta – Journal of Construction and Architecture. 2020; 22 (2): 112–119. DOI: 10.31675/1607-1859-2020-22-2-112-119 (In Russian)


Review

For citations:


Ibe E.E., Mironov S.E., Shibaeva G.N. Efficient Ceramics Based on Organic Waste of the Republic of Khakassia. Vestnik Tomskogo gosudarstvennogo arkhitekturno-stroitel'nogo universiteta. JOURNAL of Construction and Architecture. 2025;27(4):156-171. (In Russ.) https://doi.org/10.31675/1607-1859-2025-27-4-156-171. EDN: SBGXMZ

Views: 11


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 1607-1859 (Print)
ISSN 2310-0044 (Online)