Warm-Mix Asphalt Technology Using Heavy Bitumen
Abstract
The paper presents the warm-mix asphalt technology using heavy bitumen and wet mineral additive added to a mixer at the asphalt plant. The device is designed to wet the mineral additive. The possibility of using hydrolytic lignin in the capacity of the mineral additive is shown for the production of warm-mix asphalt. The paper gives the results of laboratory tests and experiments on the use of warm-mix asphalt technology on public roads.
About the Authors
Sergey S. Shaburov
National Research Irkutsk State Technical University
Russian Federation
Russian Federation
Vladimir Y. Kibirev
National Research Irkutsk State Technical University
Russian Federation
Russian Federation
References
1. Tret'yakov R. Teplyj asfal'tobeton v dorozhnom stroitel'stve [Warm-mix asphalt in road construction]. Osnovnye stredstva. 2014. No. 5. (rus)
2. Radovskii B.S. Tehnologija novogo teplogo asfal'tobetona v SShA [Warm-mix asphalt technology in the USA]. Dorozhnaja tehnika. 2008. Pp. 24–28. (rus)
3. Hutschenreuter J., Werner T. Asfal't v dorozhnom stroitel'stve [Asphalt im Strassenbau] Moscow : ABV-Press, 2013. 450 p. (transl. from Germ.)
4. Pershin M.H., Barinov E.N., Korenevskii G.V. Vspenennyj bitum v dorozhnom stroitel'stve [Foamed bitumen for road construction]. Moscow : Transport Publ., 1989. 80 p. (rus)
5. Dvorkin L.I. Stroitel'nye materialy iz othodov promyshlennosti [Building materials based on industrial wastes]. Rostov-on-Don : Feniks Publ., 2007. 368 p. (rus)
Review
For citations:
Shaburov S.S., Kibirev V.Y. Warm-Mix Asphalt Technology Using Heavy Bitumen. Vestnik of Tomsk state university of architecture and building. 2016;(1):173-179. (In Russ.)
Views:
548
Email this article 