Compression and tension tests of wooden elements with glued steel plates
https://doi.org/10.31675/1607-1859-2022-24-5-98-107
Abstract
The use of classical elements in spatial structures of prefabricated buildings is inefficient due to a design complexity and specific quantity of metal in the assembled components. The paper studies the durability, stability and deformability of wooden elements with glued metal plates working in a multiply connected structure under compressive and tensile loads. The experiment series include maximum loads causing the loss of stability and destruction of prototypes as well as deformation of wooden and metal elements. As a result, the dependences are suggested for the carrying capacity of elements on the load type, thickness and depth of the glued steel plate, and the dependence of tension and compression of elements on the efforts. The latter can be applied in calculations under the strain scheme and modeling of the joint compliance of the multiply connected structure.
Keywords
glued plates,
structural design,
wood,
compression,
tension,
tests,
stability loss,
production waste
About the Authors
E. A. Chaikin
Siberian Federal University
Russian Federation
Russian Federation
Evgenii A. Chaikin, Senior Lecturer
660041
79, Svobodnyi Ave.
Krasnoyarsk
S. V. Deordiev
Siberian Federal University
Russian Federation
Russian Federation
Sergey V. Deordiev, PhD, A/Professor
660041
79, Svobodnyi Ave.
Krasnoyarsk
References
1. Koval'chuk L. M. Derevyannyye konstruktsii – problemy i resheniya [Wooden structures: Problems and solutions]. Promyshlennoye i grazhdanskoye stroitel'stvo. 2001. V. 10. Pp. 13−14. (rus)
2. Inzhutov I. S., Dmitriev P. A., Deordiev S. V., Zakharyuta V. V. Analiz sushchestvuyushchikh uzlov sopryazheniya prostranstvennykh konstruktsiy i razrabotka sborno-razbornogo uzlovogo elementa [Analysis of assembled components of structures and development of nonassembled component]. Vestnik MGSU. 2013. No. 3. Pp. 61−71. (rus)
3. Tsaritova N. G., Lagutina D. R. Analiz sushchestvuyushchikh uzlovykh soyedineniy prostranstvennykh konstruktsiy i razrabotka sharnirnogo uzla [Analysis of assembled components of structures and development of pin-connected joint]. Sovremennoye stroitel'stvo i arkhitektura. 2020. V. 4 (20). Pp. 26−30. (rus)
4. Turkovskiy S. B., Pogorel'tsev A. A., Preobrazhenskaya I. P. Kleyenyye derevyannyye konstruktsii s uzlami na vkleyennykh sterzhnyakh v sovremennom stroitel'stve (sistema TSNIISK) [Glued wooden structures with assemblies on glued rods in modern construction]. Moscow: Stroimaterialy, 2013. 308 p. (rus)
5. Steiger R., Serrano E., Stepinac M., Rajcic V., O'Neill C., McPolin D., Widmann R. Strengthening of timber structures with glued-in rods. Construction and Building Materials. 2015. V. 97. Рp. 90−105.
6. Rudnev I. V., Zhadanov V. I., Dmitriyev P. A. K voprosu primeneniya vkleyennykh metallicheskikh plastin v soyedineniyakh derevyannykh konstruktsiy [Toward the use of glued metal plates in joints of wooden structures]. In: Stroitel'naya nauka-2014: Teoriya, obrazovaniye, praktika, innovatsii: Sbornik trudov mezhdunarodnoy nauchno-tekhnicheskoy konferentsii (Proc. Int. Sci. Conf. ‘Building Science-2014: Theory, Education, Practice, Innovation’). Arkhangelsk: Tipografiya “Tochka”, 2014. Pp. 309−314. (rus)
7. Bradford M. A., Hassanieh A., Valipour H. R., Foster S. J. Sustainable steel-timber joints for framed structures. Procedia Engineering. 2017. V. 172. Pp. 2−12.
8. Lokaj A. Round timber bolted joints with steel plates under static and cyclic loading. Key Engineering Materials. 2014. V. 627. Pp. 29−32.
9. Inzhutov I. S., Dmitriyev P. A., Zhadanov V. I., Deordiyev S. V., Zakharyuta V. V. Polnosbornoye zdaniye zamknutogo tipa s karkasom iz otkhodov fanernogo proizvodstva [Fully prefabricated building of a closed type with a frame from plywood production waste]. Vestnik MGSU. 2013. V. 7. Pp. 40−50. (rus)
10. Vasylev V. N., Bezushko A. V. Konstruktivnyye resheniya uzlov sopryazheniya strukturnykh pokrytiy dlya promyshlennykh zdaniy [Structural solutions for assembled components of structural coatings for industrial buildings]. Metallicheskiye konstruktsii. 2016. V. 4. Pp. 193−205. (rus)
11. Rudnev I. V., Zhadanov V. I., Lisov S. V. Soyedineniya elementov derevyannykh konstruktsiy s primeneniyem vkleyennykh stal'nykh plastin [Joint elements of wooden structures with glued steel plates]. Izvestiya vysshikh uchebnykh zavedeniy. Stroitel'stvo. 2014. V. 4. Pp. 5−8. (rus)
12. Rudnev I. V., Zhadanov V. I. Metodika rascheta soyedineniy elementov derevyannykh konstruktsiy na vkleyennykh stal'nykh plastinakh [Calculation of joint elements of wooden structures with glued steel plates]. Vestnik Orenburgskogo gosudarstvennogo universiteta. 2015. V. 5. Pp. 155−161. (rus)
13. Peresypkina V. A., Zhadanov V. I. Stal'nyye vkleyennyye plastiny v uzlovykh soyedineniyakh derevyannykh konstruktsiy [Steel glued plates in joint elements of wooden structures]. Shag v nauku. 2021. V. 1. Pp. 94−97. (rus)
Review
For citations:
Chaikin E.A., Deordiev S.V. Compression and tension tests of wooden elements with glued steel plates. Vestnik Tomskogo gosudarstvennogo arkhitekturno-stroitel'nogo universiteta. JOURNAL of Construction and Architecture. 2022;24(5):98-107. (In Russ.) https://doi.org/10.31675/1607-1859-2022-24-5-98-107
Views:
208
Email this article 