Composition development of multicomponent fine concrete
https://doi.org/10.31675/1607-1859-2022-24-2-114-124
Abstract
The paper presents the analysis of the composition development of fine concrete. The design algorithm is proposed for the fine concrete composition with respect to its initial properties, including finely-dispersed components providing a homogeneous dense concrete structure with high performance properties. The proposed method is tested for the concrete composition with the multifunctional additive. The results concern the effect of this additive on the performance of fine concrete.
About the Authors
O. V. Dem'yanenko
Tomsk State University of Architecture and Building
Russian Federation
Russian Federation
Olga V. Dem'yanenko - Senior Lecturer.
2, Solyanaya Sq., 634003, Tomsk
N. O. Kopanitsa
Tomsk State University of Architecture and Building
Russian Federation
Russian Federation
Anzhelika A. Kulikova - Research Assistant.
2, Solyanaya Sq., 634003, Tomsk
A. A. Kulikova
Tomsk State University of Architecture and Building
Russian Federation
Russian Federation
Natal'ya O. Kopanitsa - DSc, Professor.
2, Solyanaya Sq., 634003, Tomsk
A. M. Ustinov
Tomsk State University of Architecture and Building
Russian Federation
Russian Federation
Artem M. Ustinov - PhD, A/Professor.
2, Solyanaya Sq., 634003, Tomsk
References
1. Dem'yanenko O.V., Kulikova A.A., Kopanitsa N.O. Razrabotka kompleksnoi polifunktsional''noi dobavki dlya tsementnogo kamnya i betona [The effect of complex multi-purpose additive on operating properties of hydrated cement and concrete]. Vestnik Tomskogo gosudarstvennogo arkhitekturno-stroitel'nogo universiteta – Journal of Construction and Architecture. 2020. V. 22. No. 5. Pp. 139−152. (rus)
2. De Larrard F. Concrete mixture proportioning. A scientific approach. London; New York, 1998. 448 p.
3. Belov V.V., Smirnov M.A. Optimizatsiya granulometricheskogo sostava kompozitsii dlya izgotovleniya bezobzhigovykh stroitel'nykh konglomeratov [Optimisation of particle size distribution of compositions for unburnt building conglomerate production]. Vestnik Tsentral'nogo regional'nogo otdeleniya RAASN. 2010. No. 9. Pp. 65−72. (rus)
4. Frank D., Friedemann K., Schmidt D. Optimisierungder Mischungsowie Verifizirung der Eigenschaften Saueresistente Hochleistungbetone. Betonwerk Fertigteil-Technik. 2003. No. 3. Pp. 30−38.
5. Rezaev R.O. Optimizatsiya retseptur tyazhelogo betona na osnove teorii plotnosti upakovki [Optimisation of heavy concrete composition based on packing density theory]. Dorogi i mosty. 2019. No. 42. Pp. 271–288. (rus)
6. Rezaev R.O., Dem'yanenko O.V., Kopanitsa N.O. Opredelenie maksimal'noi plotnosti upakovki polikomponentnykh zapolnitelei dlya betona [Maximum packing density of multicomponent aggregates for concrete]. Alitinform: Tsement. Beton. Sukhie smesi. 2019. No. 1. Pp. 28−38. (rus)
7. Kudyakov A.I., Smirnov A.G., Petrov G.G., Dushenin N.P. Proektirovanie i ispol'zovanie zapolnitelei s optimal'noi mezhzernovoi pustotnost'yu [Design and use of aggregates with optimum grain spacing]. Izvestiya vysshikh uchebnykh zavedenii. Stroitel'stvo i arkhitektura. 1987. No. 7. Pp. 135. (rus)
Review
For citations:
Dem'yanenko O.V., Kopanitsa N.O., Kulikova A.A., Ustinov A.M. Composition development of multicomponent fine concrete. Vestnik Tomskogo gosudarstvennogo arkhitekturno-stroitel'nogo universiteta. JOURNAL of Construction and Architecture. 2022;24(2):114-124. (In Russ.) https://doi.org/10.31675/1607-1859-2022-24-2-114-124
Views:
295
Email this article 