Glass and metallurgical wastes in facing ceramics production
https://doi.org/10.31675/1607-1859-2021-23-6-165-171
Abstract
Purpose: The aim of this work is facing ceramic brick production using glass and metallurgical wastes. Methodology: Compressive strength, density, water absorption testing. Findings: The facing ceramic specimens are obtained at a 1050 °C baking temperature by using a mixture consisting of 40 % clay and 60 % broken glass. The operating modes for the laboratory specimen fabrication are selected such that they possess 2064 kg/m3 density and 42.24 MPa compressive strength. The specimens are characterized by the formation of close pores.
About the Authors
N. K. Skripnikova
Tomsk State University of Architecture and Building
Russian Federation
Russian Federation
Nelli K. Skripnikova, DSc, Professor
2, Solyanaya Sq., 634003, Tomsk
O. A. Kunts
Tomsk State University of Architecture and Building
Russian Federation
Russian Federation
Olesya A. Kunts, Graduate Student
2, Solyanaya Sq., 634003, Tomsk
A. B. Ulmasov,
Tomsk State University of Architecture and Building
Russian Federation
Russian Federation
Akhrorbek B. Ulmasov, Graduate Student
2, Solyanaya Sq., 634003, Tomsk
References
1. Vorontsov, V.M., German I.I. Steklo i keramika v arkhitekture [Glass and ceramics in architecture]. Belgorod: BSTU, 2010. 106 p. (rus)
2. Vitkalova I.A., Vitkalova I.A., Torlova A.S., Pikalov E.S. Primenenie trepela v proizvodstve fasadnoi keramiki, poluchaemoi s ispol'zovaniem stekloboya [Tripoli powder in facing ceramics production based on broken glass]. Mezhdunarodnyi nauchno-issledovatel'skii zhurnal. 2019. No. 12-1 (90). Pp. 8386. (rus)
3. Yuriev I.Yu., Skripnikova N.K., Volokitin G.G., Volokitin O.G., Shekhovtsov V.V. Stenovye keramicheskie izdeliya s ispol'zovaniem alyumosilikatnykh otkhodov TES [Wall ceramic products based on aluminosilicate waste from thermal power plants]. Tomsk: TSUAB, 2018. 136 p. (rus)
4. Gurieva V.A., Ilyina A.A. Production waste as a component of raw materials for construction ceramics. Key Engineering Materials. 2020. V. 839. Pp. 184188.
5. Montaev S.A., Adilova N.B., Montaeva N.S., Dosov K.Z., Taudaeva A.A. Study of raw materials with the aim of obtaining ceramic filler and heat-insulating and structural wall ceramics. International Journal of Mechanical and Production Engineering Research and Development. 2019. V. 9. No. 5. Pp. 10571064.
6. Vlasov V.A., Shekhovtsov V.V., Volokitin O.G., Skripnikova N.K., Volokitin G.G., Gafarov R.E. Osobennosti formirovaniya strukturno-fazovogo sostava mikrosfer na osnove materialov alyumosilikatnoi gruppy [Structure and phase composition of aluminosilicate-based microspheres]. Vestnik Tomskogo gosudarstvennogo arkhitekturno-stroitel'nogo universiteta – Journal of Construction and Architecture. 2020. V. 22. No. 4. Pp. 33–37. (rus)
7. Salakhov A.M. Sovremennye keramicheskie materialy [Modern ceramic materials]. Kazan: Kazan Federal University, 2016. 407 p. (rus)
8. Shang W., Peng Z., Huang Y., Li G., Jiang T., et al. Production of glass-ceramics from metallurgical slags. Journal of Cleaner Production. 2021. V. 317. 128220.
9. Vitkalova I.A., Pikalov E.S., Torlova A.S. Utilizatsiya stekloboya v proizvodstve oblitsovochnoi keramiki s effektom samoglazurovaniya [Utilization of broken glass in the production of facing ceramics with self-glazing effect]. Mezhdunarodnyi nauchno-issledovatel'skii zhurnal. 2019. No. 11–1 (89). Pp. 6266. (rus)
10. Vlasov V.A., Skripnikova N.K., Shekhovtsov V.V., Volokitin O.G., Semenovs M.A., Volokitin G.G., Togidny M.L. Keramicheskie stenovye materialy na osnove nekonditsionnogo syr'ya [Ceramic wall materials based on substandard raw materials]. Tomsk: TSUAB, 2020. 144 p. (rus)
11. Shakhova V.N., Berezovskaya A.V., Pikalov E.S. Razrabotka oblitsovochnogo keramicheskogo materiala s effektom samoglazurovaniya na osnove maloplastichnoi gliny [Facing ceramic material with self-glazing effect based on low-plasticity clay]. Steklo i keramika. 2019. No. 1. Pp. 13–18. (rus)
12. Skripnikova N.K., Vlasov V.A., Semenovykh M.A., Volokitin G.G., Shekhovtsov V.V. Issledovanie vozmozhnosti ispol''zovaniya uglerodsoderzhashchego tekhnogennogo syr''ya pri proizvodstve keramicheskikh izdelii [Carboncontaining technogenic raw materials in ceramic product production]. Vestnik Tomskogo gosudarstvennogo arkhitekturno-stroitel'nogo universiteta – Journal of Construction and Architecture. 2019. V. 21. No. 6. Pp. 115121. (rus)
Review
For citations:
Skripnikova N.K., Kunts O.A., Ulmasov, A.B. Glass and metallurgical wastes in facing ceramics production. Vestnik Tomskogo gosudarstvennogo arkhitekturno-stroitel'nogo universiteta. JOURNAL of Construction and Architecture. 2021;23(6):165-171. (In Russ.) https://doi.org/10.31675/1607-1859-2021-23-6-165-171
Views:
363
Email this article 