IMPROVEMENT OF ENVIRONMENTAL SAFETY IN CONSTRUCTION AND ROAD SERVICE
https://doi.org/10.31675/1607-1859-2020-22-5-200-210
Abstract
The paper considers the road transportation sector in the context of the negative impacts of the global economic and financial crises on the environment. The ecology-oriented development of the road construction, road repair and maintenance are described herein. The promising research and innovation development in Siberia includes the ways to increase the stability of asphalt concrete pavements, studying the possibilities of waste utilization produced by the local industrial enterprises (for example, stillage residues of the chemical industry) for the road asphalt modification; replacement of rock materials used in the upper and lower layers of the pavement coatings by by-passed stone, utilization of plastics scrap and rubber in polymer modification.
About the Authors
O. D. Lukashevich
Тоmsk State University of Architecture and Building
Russian Federation
Russian Federation
Olga D. Lukashevich, DSc, Professor
2, Solyanaya Sq., 634003, Tomsk
V. N. Lukashevich
Тоmsk State University of Architecture and Building
Russian Federation
Russian Federation
Viktor N. Lukashevich, DSc, Professor
2, Solyanaya Sq., 634003, Tomsk
References
1. Ekologicheskaya bezopasnost' avtomobil'noi dorogi: ponyatie i kolichestvennaya otsenka: otraslevoi dorozhnyi metodicheskii document [Environmental safety of automobile roads: concept and quantitative evaluation]. Moscow: Rosavtodor, 2002. (rus)
2. ODN 218.5.016-2002 Pokazateli i normy ekologicheskoi bezopasnosti avtomobil'noi dorogi. Izd. ofits. – Otrasl. dor. normy [Indicators and standards of environmental safety of automobile roads. Indicators and norms of environmental road safety]. Moscow: Rosavtodor, 2003. 44 p. (rus)
3. ODM 218.2.013-2011. Metodicheskie rekomendatsii po zashchite ot transportnogo shuma territorii, prilegayushchikh k avtomobil'nym dorogam: otraslevoi dorozhnyi metodicheskii dokument [Methodological recommendations for protection of territories adjacent to highways from traffic noise]. Moscow: Rosavtodor, 2012. 160 p. (rus)
4. Spravochnoe posobie po okhrane okruzhayushchei prirodnoi sredy i ratsional'nomu ispol'zovaniyu prirodnykh resursov (upravlenie i reglamentirovanie prirodookhrannoi deyatel'nosti v dorozhnom khozyaistve s uchetom trebovanii standartov serii GOST R ISO 14000) [Reference manual on environmental protection and rational use of natural resources (Environmental management in the road sector according to GOST R ISO 14000 requirements)]. Moscow: Informavtodor, 2000. 180 p. (rus)
5. Glukhov A.T., Medvedev D.S. Proektirovanie ekologicheskikh meropriyatii [Environmental measure projecting]. Moscow: Informavtodor, 2003. (3). 23–30. (rus)
6. Evgen'ev I.E., Savin V.V. Zashchita prirodnoi sredy pri stroitel'stve, remonte i soderzhanii avtomobil'nykh dorog [Environmental protection in road construction, repair and maintenance]. Moscow: Transport, 1989. 239 p. (rus)
7. Podol'skii V.P., Samodurova T.V., Fedorova Yu.V. Ekologicheskie aspekty zimnego soderzhaniya dorog [Environmental aspects of winter road servicing]. Voronezh: Voronezh State University of Architecture and Civil Engineering, 2000. 152 p. (rus)
8. Evgen'ev I.E., Kurdenkova I.B. Posobie po okhrane okruzhayushchei sredy pri proizvodstve dorozhno-stroitel'nykh materialov [Environmental protection guide for road building materials]. Moscow: Informavtodor. 2002. 180 p. (rus)
9. Petrosyan T.O., Sidorenko V.F. Ekologicheskaya bezopasnost' avtomobil'nykh dorog [Environmental safety of roads] Vestnik Volgogradskogo gosudarstvennogo arkhitekturno-stroitel'nogo universiteta. Seriya: Stroitel'stvo i arkhitektura. 2012. No. 28 (47). Pp. 332–336. (rus)
10. Lukanin V.N., Lents K.-Kh. (Eds) Avtomobil'nye dorogi: bezopasnost', ekologicheskie problemy, ekonomika: Ros.-Germ. opyt [Automobile roads: safety, environmental issues, economics: Russian-German experience]. Moscow: Logos, 2002. 607 p. (rus)
11. Sait peredovykh zelenykh tekhnologii v Rossii i za rubezhom [Website for advanced green technologies in Russia and abroad]. Available: greenevolution.ru/blogs/tri–glavnye–probl (accessed September 25, 2020) (rus)
12. Konoreva O.V., Murav'ev Yu.A. Analiz sovremennykh metodov povysheniya ustoichivosti asfal'tobetonnykh pokrytii k koleeobrazovaniyu [Modern methods of rutting resistance increase of asphalt concrete pavements]. Inzhenernyi vestnik Dona. 2016. No 4. Available: ivdon.ru/ru/magazine/archive/n4y2016/3802 (rus)
13. Nikolenko M.A., Besschetnov B.V. Povyshenie dlitel'noi treshchinostoikosti asfal'tobetona dorozhnykh pokrytii [Increase of long-term crack resistance of asphalt concrete pavements]. Inzhenernyi vestnik Dona. 2012. No. 2. Available: ivdon.ru/ru/magazine/archive/n2y2012/856. (rus)
14. Leskin A.I., Gofman D.I., Katasonov M.V., Vovko V.V., Skorobogatchenko D.A. Ispol'zovanie mestnykh otkhodov khimicheskoi promyshlennosti v sostavlennykh vyazhushchikh [Local chemical waste for binders]. Vestnik Volgogradskogo gosudarstvennogo arkhitekturno-stroitel'nogo universiteta. Seriya: Stroitel'stvo i arkhitektura. 2018. No. 53 (72). Pp. 83–91. (rus)
15. Mavliev L.F., Bulanov P.E., Vdovin E.A., Zakharov V.V., Gimazov A.R. Modifikatsiya dorozhno-stroitel'nykh materialov na osnove otkhodov kamnedrobleniya, obrabotannykh tsementom, vvedeniem prirodnogo peska i metilsilikonata kaliya [Modification of road-building materials based on by-passed stone with cement, introduction of natural sand and potassium methyl siliconate]. Izvestiya KGASU. 2016. No. 1 (35). Pp. 247–254. (rus)
16. Korneichuk N.S., Leskin A.I., Rakhimova N.A. Polimerno-bitumnoe vyazhushchee na osnove vtorichnogo polipropilena dlya proizvodstva asfal'tobetonnykh smesei [Polymer-bitumen binder based on recycled polypropylene for the production of asphalt concrete mixtures]. Inzhenernyi vestnik Dona. 2017. No. 2. P. 11. Available: www.ivdon.ru/uploads/article/ pdf/IVD_182_Korneichuk_Lesquin_Rakhimova.pdf_4e7ad4P.367 (rus)
17. Lukashevich V.N., Pogorelyi A.V. Uvelichenie sroka sluzhby dorozhnykh pokrytii za schet dispersnogo armirovaniya i dvukhstadiinoi tekhnologii prigotovleniya asfal'tobetonnykh smesei [Increase in road pavement service life due to dispersed reinforcement and two-stage asphalt concrete mix technology]. Vestnik Tomskogo gosudarstvennogo arkhitekturno-stroitel'nogo universiteta. 2001. No. 2. Pp. 45–51. (rus)
18. Lukashevich V.N., Efanov N.E. Issledovanie vliyaniya tekhnologii prigotovleniya asfal'tobetonnykh smesei na protsessy stareniya asfal'tovogo vyazhushchego pri ispol'zovanii voloknistykh sorbentov v kachestve dispersnoi armatury [Asphalt concrete mix technology affecting aging processes of asphalt binder with fibrous sorbents used as dispersion reinforcement]. Vestnik of Tomsk State University of Architecture and Building. 2012. No. 2. Pp. 191–196. (rus)
19. Lukashevich V., Efanov I., Vlasov V., Lukashevich O. Asphalt concrete pavement reinforced with chemical fibers. MATEC Web of Conferences. 2018. V. 216. 01013. DOI: 10.1051/ matecconf/201821601013.
20. Abdullah M.E., Abd Kader S.A., Putra Jaya R., Yaacob H., Abdul Hassan N., Che Wan C.N. Effect of waste plastic as bitumen modified in asphalt mixture. MATEC Web of Conferences. 2017. P. 103.
21. Brasileiro L., Moreno-Navarro F., Tauste-Martínez R., Matos J., Rubio-Gámez M.D.C. Reclaimed polymers as asphalt binder modifiers for more sustainable roads: A review. Sustainability. 2019. V. 11. No. 3. P. 646.
22. Chakraborty A., Mehta S. Utilization & minimization of waste plastic in construction of pavement: A review. International Journal of Engineering Technology Science and Research. 2017. V. 4. No. 8. Рр. 2394–3386.
23. Costa L.M.B., Silva H.M.R.D., Peralta J., Oliveira J.R.M. Using waste polymers as a reliable alternative for asphalt binder modification – Performance and morphological assessment. Construction and Building Materials. 2019. V. 198. Pp. 237–244.
Review
For citations:
Lukashevich O.D., Lukashevich V.N. IMPROVEMENT OF ENVIRONMENTAL SAFETY IN CONSTRUCTION AND ROAD SERVICE. Vestnik Tomskogo gosudarstvennogo arkhitekturno-stroitel'nogo universiteta. JOURNAL of Construction and Architecture. 2020;22(5):200-210. (In Russ.) https://doi.org/10.31675/1607-1859-2020-22-5-200-210
Views:
8230
Email this article 