Preview

Vestnik Tomskogo gosudarstvennogo arkhitekturno-stroitel'nogo universiteta. JOURNAL of Construction and Architecture

Advanced search

THE EFFECT OF COMPLEX MULTI-PURPOSE ADDITIVE ON OPERATING PROPERTIES OF HYDRATED CEMENT AND CONCRETE

https://doi.org/10.31675/1607-1859-2020-22-5-139-152

Abstract

The research developments in materials science in the construction field concerning the formulation and production process of fine-grain concrete are aimed at the formation of structure and properties that provide the appropriate performance characteristics. The literature review and experimental data on the concrete treatment made show that the required quality of concrete can be achieved by changing the concrete mixture composition, activation of aggregate and mixing water, introduction of multi-purpose modifying additives, different approaches, etc. The paper presents the development of the effective multi-purpose additive consisting of such industrial wastes as marble-microcalcite, nano silicon dioxide, microsilica, and peat hermally modified at 600 °C. The influence of this additive on hydrated cement and concrete properties is studied herein. It is shown that the introduction of the multi-purpose additive in an amount of 5 % with a decrease in the cement consumption, improves the compressive strength of hydrated cement stone up to 69 %. The chemical composition of new formations of modified hydrated cement is determined by the physicochemical analysis.

About the Authors

O. V. Dem'yanenko
Tomsk State University of Architecture and Building
Russian Federation

Olga V. Dem'yanenko, Research Assistant

2, Solyanaya Sq., 634003, Tomsk



A. A. Kulikova
Tomsk State University of Architecture and Building
Russian Federation

Anzhelika A. Kulikova, Undergraduate

2, Solyanaya Sq., 634003, Tomsk



N. O. Kopanitsa
Tomsk State University of Architecture and Building
Russian Federation

Natal'ya O. Kopanitsa, DSc, Professor

2, Solyanaya Sq., 634003, Tomsk



References

1. Drexler K.E., Peterson C., Pergamit G. Unbounding the future: the nanotechnology revolution. New York: William Morrow, 1991.

2. Dem'yanenko O.V., Kopanica N.O. Vliyanie nanochastic dioksida kremniya na ekspluatacionnye svojstva cementnyh sistem [Effect of silicon dioxide nanoparticles on operational properties of cement systems]. Materialy II Vserossijskoj nauchnoj konferencii molodyh uchenyh s mezhdunarodnym uchastiem (Proc. 2nd All-Russ. Sci. Conf. of Young Scientists). Tomsk, 2015. Pp. 408–411. (rus)

3. Kopanica N.O., Sarkisov Yu.S., Dem'yanenko O.V. Peculiarities of silica additives application in building mixes production. American Institute of Physics. 1800. P. 020010.

4. Kopanitsa N.O., Sarkisov Yu.S., Dem'yanenko O.V. Primenenie nanodispersnogo kremnezema v proizvodstve stroitel'nyh smesej [Nanodispersed silicon dioxide used in the production of mix mortars]. Vestnik of Tomsk State University of Architecture and Building. 2016. No. 5. Pp. 140–150. (rus)

5. Kosmachev P.V., Dem'yanenko O.V., Kopanica N.O., Skripnikova N.K., Vlasov V.A. Kompozicionnye materialy na osnove cementa s nanodispersnym dioksidom kremniya [Composite materials based on cement with nanodispersed silicon dioxide]. Vestnik of Tomsk State University of Architecture and Building. 2017. No. 4 (63). Pp. 139–146 (rus)

6. Dem'yanenko O.V., Kopanitsa N.O., Sorokina E.A. Vliyanie dobavki termomodifitsirovannogo torfa na tekhnologicheskie svoistva stroitel''nykh smesei dlya 3d-pechati [Performance characteristics of 3D printing construction mixes depending on thermally-modified peat additive]. Vestnik Tomskogo gosudarstvennogo arkhitekturno-stroitel'nogo universiteta – Journal of Construction and Architecture. 2018. V. 20. No. 4. Pp. 122–134. (rus)

7. Dem'yanenko O.V., Kopanitsa N.O., Sarkisov Yu.S, Gorshkova A.V. Cementnye kompozicii, modificirovannye kombinirovannymi nanodispersnymi dobavkami [Cement compositions modified by combined nanodispersed additives]. Vestnik of Tomsk State University of Architecture and Building. 2017. No. 4. Pp. 101–106. (rus)

8. Abzaev Yu.A., Kopanica N.O., Klimenov V.A., Sarkisov Yu.S., Gorlenko N.P., Dem'yanenko O.V. Modelirovanie strukturnogo sostoyaniya amorfnogo tarkosila [Structural state modeling of amorphous tarkosil]. Vestnik of Tomsk State University of Architecture and Building. 2015. No. 3 (50). Pp. 121–133. (rus)

9. Kopanica N.O., Kasatkina A.V., Dem'yanenko O.V., Sarkisov Yu.S, Gorlenko N.P. Sposob polucheniya modificiruyushchej dobavki dlya cementnoj kompozicii i cementnaya kompoziciya [Production method for modifying additive for cement composition]. Patent Russ. Fed. N 2576766, 2015. (rus)

10. Newman J., Choo B.S. (Eds). Advanced concrete technology. In: Constituent materials. Elsevier, 2003. 280p. (rus)

11. Gorshkova A.V. Suhie stroitel'nye smesi s modificiruyushchej dobavkoj na osnove torfa. Dis.kand. tekhn.nauk [Dry construction mixtures with peat-based modifying additive. PhD Thesis]. Tomsk, 2015. 161 p. (rus)

12. Dem'yanenko O.V. Kulikova A.A. Effektivnost' primeneniya mikrokal'cita v proizvodstve cementnyh kompozicij na cementnoj osnove [Microcalcites in cement-based composition production]. Molodezh', nauka, tekhnologii: novye idei i perspektivy. Izbrannye doklady IV Mezhdunarodnoj nauchnoj konferencii studentov i molodyh uchenyh (Proc. 1st Int. Sci. Conf. ‘Youth, Science, Solutions: Ideas and Prospects’). 2017. Pp. 39–41. (rus)

13. Demyanenko O.V., Kopanitsa N.O., Sarkisov Y.S., Abzaev Y.A., Ikonnikova K.V., Ikonnikova L.F. Quantitative phase analysis of modified hardened cement paste. IOP Conference Series: Earth and Environmental Science. 2017. No. 87 (9) [092008]. DOI: 10.1088/1755- 1315/87/9/092008


Review

For citations:


Dem'yanenko O.V., Kulikova A.A., Kopanitsa N.O. THE EFFECT OF COMPLEX MULTI-PURPOSE ADDITIVE ON OPERATING PROPERTIES OF HYDRATED CEMENT AND CONCRETE. Vestnik Tomskogo gosudarstvennogo arkhitekturno-stroitel'nogo universiteta. JOURNAL of Construction and Architecture. 2020;22(5):139-152. (In Russ.) https://doi.org/10.31675/1607-1859-2020-22-5-139-152

Views: 554


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 1607-1859 (Print)
ISSN 2310-0044 (Online)