CARBON-CONTAINING TECHNOGENIC RAW MATERIALS IN CERAMIC PRODUCT PRODUCTION
https://doi.org/10.31675/1607-1859-2019-21-6-115-121
Abstract
The paper explores the possibility of using carbon-containing waste produced by a metallurgical plant. The physico-mechanical characteristics of the obtained products are studied depending on the compositions and the grain size of the feedstock. It is found that the use of carbon-containing waste allows producing ceramic bricks with the following parameters: ρ ~ 2150 kg/m3, Rsg ~ 42 MPa, W ~ 3.4 %, and the frost resistance of over 50 cycles. The results of phase formation in ceramic products are presented. It is shown that the use of carbon-containing waste allows to obtain alumi-nosilicate compounds, such as anorthites and quartz-containing compounds, which give strength characteristics to finished products.
About the Authors
N. K. Skripnikova
Tomsk State University of Architecture and Building
Russian Federation
Russian Federation
Nelli K. Skripnikova, DSc, Professor
2, Solyanaya Sq., 634003, Tomsk
V. A. Vlasov
Tomsk State University of Architecture and Building
Russian Federation
Russian Federation
Viktor A. Vlasov, DSc, Professor
2, Solyanaya Sq., 634003, Tomsk
M. A. Semenovykh
Tomsk State University of Architecture and Building
Russian Federation
Russian Federation
Mark A. Semenovykh, Research Assistant
2, Solyanaya Sq., 634003, Tomsk
G. G. Volokitin
Tomsk State University of Architecture and Building
Russian Federation
Russian Federation
Gennadii G. Volokitin, DSc, Professor
2, Solyanaya Sq., 634003, Tomsk
V. V. Shekhovtsov
Tomsk State University of Architecture and Building
Russian Federation
Russian Federation
Valentin V. Shekhovtsov, Assistant Lrcturer
2, Solyanaya Sq., 634003, Tomsk
References
1. Yatsenko N.D., Vil'bitskaya N.A., Yatsenko A.I. Formirovanie struktury i svoistv effektivnoi stenovoi keramiki na osnove otkhodov metallurgicheskogo proizvodstva [The formation of structures and properties of building wall ceramics based on metallurgical production waste]. Izvestiya vysshikh uchebnykh zavedenii. Severo-Kavkazskii region. Seriya: Tekhnicheskie nauki. 2019. No. 2 (202). Pp. 43–47. (rus)
2. Kairakbaev A.K., Abdrakhimova E.S., Abdrakhimov V.Z. Ispol'zovanie otkhodov obogashcheniya tsvetnoi i chernoi metallurgii kazakhstana v proizvodstve keramicheskikh materialov [The use of enrichment waste from non-ferrous and ferrous metallurgy in Kazakhstan in the production of ceramic materials]. Ekologiya i promyshlennost' Rossii. 2019. V. 23. No. 6. Pp. 12–16. (rus)
3. Bekkaliev N.M., Tauyshev O.U., Umereshova S.G., et al. Ispol'zovanie proizvodstvennykh otkhodov v proizvodstve keramicheskogo kirpicha [Industrial waste in the production of ceramic bricks]. European Journal Technical and Natural Sciences. 2019. No. 2. Pp. 12–18. (rus)
4. Skripnikova N.K., Semenovykh M.A., Volokitin O.G. Obzhigovye stroitel'nye materialy s ispol'zovaniem metallurgicheskikh otkhodov [Calcined building materials based on metallur-gical waste]. Evraziiskii soyuz uchenykh. 2018. No. 2-1 (47). Pp. 47–49. (rus)
5. Kara-sal B.K.O., Seren Sh.V., Sat D.Kh.O. Klinkernyi kirpich na osnove netraditsionnykh materialov [Clinker brick based on unconventional materials]. Izvestiya vysshikh uchebnykh zavedenii. Stroitel'stvo. 2018. No. 4 (712). Pp. 51–58. (rus)
6. Imangazin M.K., Abdrakhimova E.S., Abdrakhimov V.Z., et al. Innovatsionnye napravleniya ispol'zovaniya otkhodov chernoi metallurgii v proizvodstve keramicheskogo kirpicha [Innovative use of ferrous metallurgy waste in the production of ceramic bricks]. Metallurg. 2017. No. 2. Pp. 22–25. (rus)
7. Kotova O.B., Ignatiev G.V., Shushkov D.A., Harja M., Broekmans M.A.T.M. Preparation and properties of ceramic materials from coal fly ash. Proc. 9th Geoscience Conf. for Young Scientists ‘Minerals: Structure, Properties, Methods of Investigation’. Ekaterinburg, 2020. Pp. 101–107.
8. Gineika A., Baltakys K., Dambrauskas T. The application of silica gel waste for the twostep synthesis of wollastonite in temperature range of 200–950 degrees C. Journal of Thermal Analysis and Calorimetry. 2019. V. 103. No. 3. Pp. 2263–2273.
9. Kenzour A., Belhouchet H., Kolli M., et al. Sintering behavior of anorthite-based composite ce-ramics produced from natural phosphate and kaolin. Ceramics International. 2019. V. 45. No. 16. Pp. 20258–20265.
10. Hossain, S.K.S., Roy, P.K. Fabrication of sustainable ceramic board using solidwastes for construction purpose. Construction and Building Materials. 2019. V. 222. Pp. 26–40.
11. Wang S.X., Wang H., Chen Z.W. et al. Fabrication and characterization of porous cordierite ceramics prepared from fly ash and natural minerals. Ceramics International. 2019. V. 45. No. 13. Pp. 18306–18314.
12. Sutcu M., Erdogmus E., Gencel O., Gholampour A., Atan E., Ozbakkaloglu T. Recycling of bottom ash and fly ash wastes in eco-friendly clay brick production. Journal of Cleaner Production. 2019. V. 233. Pp. 753–764.
13. Ma B.Y., Su C., Ren X., et al. Preparation and properties of porous mullite ceramics with high-closed porosity and high strength from fly ash via reaction synthesis process. Journal of Alloys and Compounds. 2019. V. 803. Pp. 981–991.
14. Skripnikova N.K., Lutsenko A.V., Litvinova V.A., et al. Obzhigovye stroitel'nye materialy s ispol'zovaniem otkhodov teploenergetiki [Calcined building materials based on heat-power engineering waste]. In: “Innovatsionnye tekhnologii v mashinostroenii sbornik trudov” VIII Mezhdunarodnoi nauchno-prakticheskoi konferentsii. Yurginskii tekhnologicheskii institute (Proc. 7th Int. Sci. Conf. ‘Innovative Technologies in Engineering’). 2017. Pp. 231–233. (rus)
15. Volokitin G.G., Skripnikova N.K., Volokitin O.G., et al. Bottom ash waste used in different construction materials. IOP Conference Series: Materials Science and Engineering. 2017. P. 012013.
Review
For citations:
Skripnikova N.K., Vlasov V.A., Semenovykh M.A., Volokitin G.G., Shekhovtsov V.V. CARBON-CONTAINING TECHNOGENIC RAW MATERIALS IN CERAMIC PRODUCT PRODUCTION. Vestnik Tomskogo gosudarstvennogo arkhitekturno-stroitel'nogo universiteta. JOURNAL of Construction and Architecture. 2019;(6):115-121. (In Russ.) https://doi.org/10.31675/1607-1859-2019-21-6-115-121
Views:
652
Email this article 