STRESS-STRAIN STATE ANALYSIS OF ANGLE-TENSION, TWO-CIRCUIT 110 kW SUSPENSION TOWER
Abstract
The analysis stress-strain state is performed for the angle-tension, two-circuit suspension tower as a spatial, statically indeterminate system with rigid joints. SCAD software is used to create a solid 3D CAD angle-tension, two-circuit suspension tower. The attention is paid to the problems arising in specifying initial data and structural design. Issues, connected with the calculation of the internal longitudinal forces in the suspension tower elements are considered. The analysis includes the joint work of the lattice elements in the 3D model of the suspension tower and the involvement of stiffening diaphragms and cross stays in all the four sides. As a result, a detailed comparison is provided for obtained internal efforts with those found in the suspension tower elements due to identical values of loadings.
About the Authors
I. M. Garanzha
The National Research Moscow State Civil Engineering University
Russian Federation
A/Professor
Russian Federation
A/Professor
A. V. Tanasoglo
Donbas National Academy of Civil Engineering and Architecture
Ukraine
PhD, A/Professor
Ukraine
PhD, A/Professor
References
1. Zelichenko A.S., Smirnov B.I. Proektirovanie mekhanicheskoi chasti vozdushnykh linii sverkhvysokogo napryazheniya [Design of mechanical part of overhead lines]. Moscow: Energoizdat, 1981. 336 p. (rus)
2. Rokotyan S.S., Reut M.A. (Eds.) Spravochnik po proektirovaniyu linii elektroperedachi [Guide to the design of power lines]. Moscow: Energiya, 1980. 296 p. (rus)
3. Perel'muter A.V., Slivker V.I. Raschetnye modeli sooruzhenii i vozmozhnost' ikh analiza [Design models of structures and their analysis]. Kiev: SCAD, 2001. 448 p. (rus).
4. Shevchenko E.V., Tanasoglo A.V. Optimal'noe proektirovanie konstruktsii bashennykh an-kerno-uglovykh opor VL 110 kV [Optimal design of angle-tension, two-circuit 110 KW suspension towers]. Vestnik Donbasskoi natsional'noi akademii stroitel'stva i arkhitektury. Zdani-ya i sooruzheniya s primeneniem novykh materialov i tekhnologii. 2013. No. 2013-3 (101). Pp. 114–116. (rus)
5. Pustogvar A.P., Tanasoglo A.V., Garanzha I.M, Shilova L.A., Adamtsevich A.O. Optimal'noe proektirovanie reshetchatykh metallicheskikh konstruktsii vozdushnykh linii elektroperedachi [Optimal design of lattice metal structures of overhead transmission lines]. MATEC Web of Conferences. 2016. No. 86. 04003. Pp. 19–28. (rus)
6. Tanasoglo A.V. Uzkobazye konstruktsii reshetchatykh opor vozdushnykh linii povyshennoi nadezhnosti [Narrow-base structures of lattice supports of high-reliable overhead lines]. Vest-nik Donbasskoi natsional'noi akademii stroitel'stva i arkhitektury. Zdaniya i sooruzheniya s primeneniem novykh materialov i tekhnologii. 2015. No. 2015-3 (113). Pp. 50–53. (rus)
7. Tanasoglo A.V. Optimal'nye konstruktivnye resheniya dvukhtsepnykh ankerno-uglovykh opor linii elektroperedachi 110 kV [Optimal design solutions for angle-tension, two-circuit 110 KW suspension towers]. Sovremennoe promyshlennoe i grazhdanskoe stroitel'stvo. 2015. V. 11. No. 1. Pp. 5–14. (rus)
8. Tanasoglo A.V. Chislenno-analiticheskaya metodika resheniya zadachi ustoichivosti pros-transtvennykh reshetchatykh konstruktsii [Numerical-analytical technique for solving the problem of stability of spatial lattice structures]. Metallicheskie konstruktsii. 2015. T. 21. No. 3. Pp. 107–117. (rus)
9. Tanasoglo A.V. Issledovanie ustoichivosti reshetchatykh stal'nykh opor linii elektroperedachi [Investigation of stability of lattice steel towers of power transmission lines]. Sovremennye stroitel'nye konstruktsii iz metalla i drevesiny. 2011. No. 15. Pt. 3. Pp. 233–238. (rus)
10. Kryukov K.P. Novgorodtsev B.P. Konstruktsii i mekhanicheskii raschet linii el-ektroperedachi [Design and mechanical calculation of power lines]. 2nd ed. Leningrad: En-ergiya, 1979. 312 p. (rus)
11. Shevchenko E.V. Sovershenstvovanie metallicheskikh konstruktsii opor vozdushnykh linii el-ektroperedachi [Improvement of metal structures of overhead power transmission lines]. 2nd ed. Makeevka: DonGASA, 1999. 169 p. (rus)
12. Gorokhov E.V., Kazakevich M.I., Shapovalov S.N., Nazim Ya.V. Aerodinamika elektrosetevykh konstruktsii [Aerodynamics of electric grid structures]. Donetsk, 2000. 336 p. (rus).
13. DBN V.2.6.163:2016. Stal'nye konstruktsii. Normy proektirovaniya [Steel structures. Design standards]. Kiev: Minregion Ukrainy, 2016. 195 p. (rus)
14. Gorokhov E.V. Durability of steel structures under reconstruction. Rotterdam: Brookfild, 1999. 297 p.
15. Dobbs M.W., Felton L.P. Optimization of truss geometry. Journal of the Structural Division, ASCE. 1969. V. 95. Pp. 2105–2118.
16. Friedland L.R. Geometric structural behavior. Thesis presented to Columbic University, New York, 1971. 98 p.
17. GhannoumE. Relisbility and security concepts applied to structural design of transmission lines. Proc.10th Annual Eng. Conf. on Reliability. Availab., Maintainab of Electric Power Jnt. May. 1983.Pp. 988–991.
18. IEEE Transactions on PAS. 1981. V. 100. No. 7. P. 12.
19. Schmit L.A. Structural design by systematic synthesis. Proc. 2nd ASCE Conference on Electronic Computation. Pittsburg, 1960. Pp. 105–122.
20. Spillers W.R. Iterative design for optimal geometry. Journal of the Structural Division, ASCE. 1975. V. 101. Pp. 1435–1442.
21. Wood A.O., Mclellan M. Transmission line design the ultimate load concept. CIGRE. 1982. Rep. 22-01.
Review
For citations:
Garanzha I.M., Tanasoglo A.V. STRESS-STRAIN STATE ANALYSIS OF ANGLE-TENSION, TWO-CIRCUIT 110 kW SUSPENSION TOWER. Vestnik Tomskogo gosudarstvennogo arkhitekturno-stroitel'nogo universiteta. JOURNAL of Construction and Architecture. 2018;(4):74-85. (In Russ.)
Views:
622
Email this article 