Cement-Sand Mixture With Modified Basalt Microfibers for Industrial Flooring

The paper presents investigation results on properties of cement-sand mixture with basalt microfibers modified with carbon nanoparticles. The required compressive strength (30 MPa) of this mixture is achieved when the content of modified basalt microfibers achieves 1 wt.%. In this case, the flexural strength of the mortar is increased by 77.5 %, the shrinkage strain is reduced by 56.2 %, and the wear resistance is increased up to 0.4 g/cm². The developed compositions and енру mortar technology are recommended for the industrial flooring.

промышленные полы, цементно-песчаные смеси и растворы, приготовление смесей, составы, базальтовые волокна, наномодифицированные базальтовые волокна, подвижность, прочность, усадочные деформации, износостойкость, industrial flooring, cement-sand mixture, mixture preparation, compositions, nanomodified basalt fibers, mobility, strength, shrinkage, wear resistance

1. Ibragimov R.A., Bogdanov R.R, Shebanova S.N. Analiz sovremennykh tekhnologicheskikh reshenii napol'nykh pokrytii promyshlennykh zdanii [The analysis of modern flooring technologies in industry]. Izvestiya KGASU. 2016. No. 4. Pp. 416–421. (rus)

2. Moroz M.N., Anan'ev S.V., Moskvin R.N., Belyakova E.A. Treshchinostoikie vysokoprochnye nalivnye poly „BePoRs‟ na modifitsirovannom gidravlicheskom vyazhushchem [Crack resistant BePoRs poured floors based on modified hydraulic cement]. Modeli, sistemy, seti v ekonomike, tekhnike, prirode i obshchestve. 2014. No. 2 (10). Pp. 178–185. (rus)

3. Gorb A. Sostoyanie, problemy i osnovnye faktory, vliyayushchie na ustroistvo kachestvennykh betonnykh polov na ob"ektakh promyshlenno-skladskogo naznacheniya [State, problems and main factors of quality concrete flooring in industrial use]. Sklad i tekhnika. 2013. No. 10. Pp. 21–23. (rus)

4. Pshenichnyi G.N. Problemy, sushchestvuyushchie v betonovedenii [Problems in concrete studies]. Tekhnologii betonov. 2014. No. 12. Pp. 42–46. (rus)

5. Klyuev S.V. Vysokoprochnyi fibrobeton dlya promyshlennogo i grazhdanskogo stroitel'stva [High-strength fiber concrete for industrial and civil applications]. Inzhenerno-stroitel'nyi zhurnal. 2012. No. 8. Pp. 61–66. (rus)

6. Kudyakov A.I., Plevkov V.S., Belov V.V., Nevskii A.V., Kudyakov K.L. Tekhnologiya i sostav uglerodofibrobetona s povyshennoi odnorodnost'yu prochnostnykh pokazatelei [Technology and composition of carbon fiber concrete with increase in strength homogeneity]. Voprosy materialovedeniya. 2016. No. 1. Pp. 66–72. (rus)

7. Kalashnikov V.I. Poroshkovye fibrobetony so sverkhvysokoi prochnost'yu s dispersnym armirovaniem fibroi [Powder fiber concretes of superhigh strength]. Proc. Int. Sci. Conf. „New Energy- and Resource-Saving Technologies in Construction Materials Production‟. Penza, 2011. Pp. 41–48. (rus)

8. Kudyakov A.I., Plevkov V.S., Kudyakov K.L., Nevskii A.V., Ushakova A.S. Sovershenstvovanie tekhnologii izgotovleniya bazal'tofibrobetona s povyshennoi odnorodnost'yu [Modern technologies of basalt fiber concrete with improved homogeneity]. Stroitel'nye materialy. 2015. No. 10. Pp. 44–48. (rus)

9. Klyuev S.V., Klyuev A.V., Sopin D.M., Netrebenko A.V., Kazlitin S.A. Tyazhelonagruzhennye poly na osnove melkozernistykh fibrobetonov [Heavy-loaded floors based on fine fiber concretes]. Inzhenerno-stroitel'nyi zhurnal. 2013. No. 3. Pp. 7–14. (rus)

10. Nizina T.A., Ponomarev A.N., Balykov A.S. Melkozernistye dispersno-armirovannye betony na osnove kompleksnykh modifitsiruyushchikh dobavok [Fine fiber concrete based on complex modifying additives]. Stroitel'nye materialy. 2016. No. 9. Pp. 68–73. (rus)

11. Falikman V.R. Nanomaterialy i nanotekhnologii v sovremennykh betonakh [Nanomaterials and nanotechnologies in modern concretes]. Promyshlennoe i grazhdanskoe stroitel'stvo. 2013. No. 1. Pp. 31–34. (rus)

12. Belova T.K. Prigotovlenie v turbulentnom smesitele tsementnogo rastvora, dispersnoarmirovannogo modifitsirovannoi mikrofibroi [Fiber-reinforced cement preparation in turbulent mixer]. Vestnik MGSU. 2016. No. 3. Pp. 47–58. (rus)

13. Gurieva V.A., Belova T.C. Structural features of the cement-sand mortar reinforced modified basalt microfiber. Procedia Engineering. Proc. 2nd Int. Conf. Industrial Engineering (ICIE2016). 2016. V. 150. Pp. 2163–2167.

14. Kurto F., Longli F., Martensvik U., Kara S. Reologiya kak instrument opredeleniya udoboukladyvaemosti [Rheology as instrument for remoldability identification]. Mezhdunarodnoe betonnoe proizvodstvo. 2011. No. 4. Pp. 38–45. (rus)