Computer-Aided Design of Hydraulic Excavator Implements
Abstract
The paper is devoted to the optimization of hydraulic excavator implements. Optimization is performed using the APM WinMachine CAD system. The load application to the excavator implements is based on the strength and kinematic analysis of the excavator operation. The strength analysis is conducted for each design position, and the dependence is constructed for the maximum equivalent stress in cross-sections of the excavator assembly components due to the angle of the arm rotation that provides the optimization of the excavator implements.
About the Authors
Aleksey V. Kuleshov
Tomsk State University of Architecture and Building
Russian Federation
Russian Federation
Vladimir A. Slepchenko
Tomsk State University of Architecture and Building
Russian Federation
Russian Federation
Irina V. Slepchenko
Tomsk State University of Architecture and Building
Russian Federation
Russian Federation
References
1. Zamrii A.A. Proektirovanie i raschet metodom konechnykh elementov v srede ARM Structure 3D [Finite element method in ARM Structure 3D]. Moscow: APM Publ., 2004. 208 p. (rus)
2. Dragunov Yu.G., Zubchenko A.S., Kashirskii Yu.V., et al. Marochnik staley i splavov [Steel and alloy grade guide]. Moscow, 2014. 1216 p. (rus)
3. Slepchenko V.A. Mashiny dlya zemlyanykh rabot. Ekskavator odnokovshovyi gidravlicheskii. Obratnaya lopata [Earth-moving machines. Hydraulic mechanical shovel. Backhoe bucket]. Tomsk: TSUAB Publ., 2015. 49 p. (rus)
4. Shcherbakov M.G., Proskurin V.A., Oleksenko V.V., Nelipa V.I., Danilov A.A., Zdorenko S.V., Koropets E.N., Zakharov B.N. Rabochee oborudovanie gidravlicheskogo ekskavatora [Hydraulic excavator implements]. Pat. Rus. Fed. N 2065003 E02F3. 1996. (rus)
5. Zienkiewicz O.C., Taylor R.L., Zhu J.Z. The finite element method: its basis and fundamentals. Butterworth Heinemann. London, 2006.
6. Komiya K., Soga K., Akagi H., Hagiwara T., Bolton M.D. Finite element modelling of excavation and advancement processes of a shield tunnelling machine, 1999.
7. Mehta G.K., Lyer V.R., Dave J. Finite element analysis and optimization of an excavator attachments.
8. Dhawale R.M., Wagh S.R. Finite element analysis of components of excavator, 2014.
9. Özgen C., İder K., Söylemez E. Shape optimization of an excavator boom by using genetic algorithm, 2008.
10. Huebner K.H., Dewhirst D.L., Smith D.E., Byrom T.G. The finite element method for engineers. New York; Toronto: John Wiley & Sons, Inc., 2001.
Review
For citations:
Kuleshov A.V., Slepchenko V.A., Slepchenko I.V. Computer-Aided Design of Hydraulic Excavator Implements. Vestnik of Tomsk state university of architecture and building. 2017;(2):204-210. (In Russ.)
Views:
598
Email this article 