Brakes State Control Methods in Lifting Mechanisms
Abstract
Brakes are the most responsible assemblies in lifting machines that determine the reliability and safety of operation. During their operation, the drag torque value changes that leads to emergency situations. This paper is devoted to the development of automated control methods for the drag torque and their use in safety systems of lift devices. The methods of detecting the drag torque of lift devices with electric drive are considered in this paper. The implementation of these methods in safety systems will protect them from emergency situations connected with malfunction of brake systems.
About the Authors
Yuriy A. Orlov
Tomsk State University of Architecture and Building
Russian Federation
Russian Federation
Denis Y.U. Orlov
Tomsk State University of Architecture and Building
Russian Federation
Russian Federation
Dmitry P. Stolyarov
Tomsk State University of Architecture and Building
Russian Federation
Russian Federation
Ruslan N. Kakhiev
Tomsk State University of Architecture and Building
Russian Federation
Russian Federation
References
1. Aleksandrov M.P. Gruzopod"emnye mashiny [Lifting machines]. Moscow: Vysshaya Shkola Publ., 2000. 552 p. (rus)
2. Aleksandrov M.P., Lysyakov A.G., Novozhilov M.P. Spravochnik. Tormoznye ustroistva [Braking device manual]. Moscow: Mashinostroenie Publ., 1985. 312 p. (rus)
3. Bortyakov D.E., Orlov A.N. Spetsial'nye gruzopod"emnye mashiny. Lebedki [Special lifting machines. Winches]. St.-Petersburg: Peter the Great St.Petersburg Polytechnic University Publ., 2005. 64 p. (rus)
4. Promyshlennaya bezopasnost' pri ekspluatatsii gruzopod"emnykh kranov: Sbornik dokumentov. Seriya 10. Vypusk 7 [Industrial safety in crane operation. Collection of documents. Series 10. Issue 7]. Moscow: Nauchno-tekhnicheskii tsentr ‘Promyshlennaya bezopasnost'’, 2009. 288 p. (rus)
5. Sushinskii V.A. Primenenie i perspektivy razvitiya priborov i sistem bezopasnosti gruzopod"emnykh kranov [Application and prospects of development of safety devices and systems of cranes]. Lift and Transportation Engineering. 2004. No. 4. Pp. 7–11. (rus)
6. Orlov Yu.A., Bukreev V.G., Orlov D.Yu., Syolyarov D.P., Kakhiev R.N. Otsenka tormoznogo momenta na osnove potreblyaemoi aktivnoi moshchnosti privodnogo elektrodvigatelya gruzopod"emnoi lebedki [Drag torque estimated by consumed power of winch drive motor]. Proc. 6th Sci. Conf. ‘Energy Electromechanical Transducers’. Tomsk: TPU Publ., 2013. Pp. 250–252. (rus)
7. Orlov Yu.A., Stolyarov D.P., Orlov D.Yu., Kakhiev R.N. Sposob kontrolya sostoyaniya tormoza lebedki s elektroprivodom [Brake state monitoring of winch]. Mining Informational and Analytical Bulletin. 2011. No. 2. Pp. 357–362. (rus)
8. Orlov Yu.A., Orlov D.J, Stoljarov D.P., Kakhiev R.N. Sposob kontrolya tormoznogo ustroistva mekhanizma pod"ema s elektroprivodom [Brake control method for electrically driven lifting mechanism]. Pat. Rus. Fed. N 2455223. IPC B66D5/00. Publ. 10.07.12, Bul. No. 19. 10 p. (rus)
9. Orlov Yu.A., Orlov D.Yu., Stolyarov D.P., Kakhiev R.N. Energeticheskii monitoring elektroprivodov kak sredstvo povysheniya nadezhnosti i bezopasnosti ekspluatatsii pod"emnykh sooruzhenii [Energy monitoring of electric drives as a means of improving the reliability and safety of lifting device operation]. Proc. Sci. Conf. ‘Modern Tendencies in Science and Education’. Pt. 3. Moscow: AR-Konsalt, 2014. Pp. 103–105. (rus)
10. Kakhiev R.N, Stolyarov D.P., Orlov D.Yu. Energeticheskii monitoring elektricheskikh gruzopod"emnykh lebedok, kak metod opredeleniya nagruzok i otsenki ikh tekhnicheskogo sostoyaniya [Energy monitoring of electric hoisting winches as method of their load detection]. Proc. 11th Int. Conf. of Students and Young Scientists ‘Prospects of Fundamental Sciences Development’. Tomsk, 22–25 April 2014. Pp. 772–774. (rus)
Review
For citations:
Orlov Yu.A., Orlov D.Y., Stolyarov D.P., Kakhiev R.N. Brakes State Control Methods in Lifting Mechanisms. Vestnik of Tomsk state university of architecture and building. 2016;(5):194-204. (In Russ.)
Views:
718
Email this article 