Preview

Vestnik Tomskogo gosudarstvennogo arkhitekturno-stroitel'nogo universiteta. JOURNAL of Construction and Architecture

Advanced search

Digital radiography and x-ray computerized tomography in building construction and construction materials science

Abstract

The paper presents the digital radiography and X-ray computerized tomography applications in construction and production of construction materials. Mechanical rebar splicing and steel wire rope coupling is controlled by the digital radiography technique. Experimental results are given for the internal structure of foam concrete and steel wire ropes using the three-dimensional model of X-ray computerized tomography. The efficiency of the digital radiography and X-ray computerized tomography techniques is proved by the fine-tuning production technology of structural members and construction materals.

About the Authors

Sergey P. Osipov
Tomsk Polytechnic University
Russian Federation


Vasilii A. Klimenov
Tomsk State University of Architecture and Building; Tomsk Polytechnic University
Russian Federation


Andrei V. Batranin
Tomsk Polytechnic University
Russian Federation


Aleksandr M. Shtein
Tomsk Polytechnic University
Russian Federation


Inga A. Prishchepa
Tomsk State University of Architecture and Building
Russian Federation


References

1. McCann D.M., Forde M.C. Review of NDT methods in the assessment of concrete and masonry structures. NDT & E International. 2001. V. 34. No 2. P. 71–84.

2. Nedavnii O.I., Osipov S.P. Assessing the condition of reinforcement in concrete using the gamma-absorption method. Russian Journal of Nondestructive Testing. 2000. V. 36. No. 7. Pp. 520–525.

3. Michel A., Peas B.J., Geiker M.R., Stang H., Olesen J.F. Monitoring reinforcement corrosion and corrosion-induced cracking using non-destructive X-ray attenuation measurements. Cement and Concrete Research. 2011. V. 41. No. 11. Pp. 1085–1094.

4. Owen R.D.B. Portable linear accelerators for X-ray and electron-beam applications in civil engineering. NDT & E International. 1998. V. 31. No. 6. Pp. 401–409.

5. Wang L.B. Frost J.D., Voyiadjis G.Z., Harman T.P. Quantification of damage parameters using X-ray tomography images. Mechanics of Materials. 2003. V. 35. No. 8. Pp. 777–790.

6. Withers P.J., Preuss M. Fatigue and damage in structural materials studied by X-ray tomography. Annual Review of Materials Research, 2012. V. 42. Pp. 81–103.

7. Klimenov V.A., Alhimov Yu.V., Shtein A.M., Kasianov S.V., Babikov S.A., Batranin A.V., Osipov S.P. Primenenie i razvitie metodov cifrovoy radiografii dlya tehnicheskoy diagnostiki, nerazrushayuschego kontrolya i inspekcii [Application and development of digital radiography for technical diagnostics, non-destructive testing and inspection]. Kontrol'. Diagnostika ('Testing. Diagnostics'). 2013. No. 13. Pp. 31−42. (rus)

8. Moskalev V.A., Chakhlov V.L. Betatrony. [Betatrons]. Tomsk : TPU Publ., 2009. 267 p. (rus)

9. Stein M., Kasyanov V.A., Chakhlov V.L., Macleod J., Marjoribanks P., Hubbard S. Small-size betatrons for radiographic inspection. Proc.16th World Conf. on Non Destructive Testing, Radiography. Montreal, Canada, 2004. 8 p.

10. Ewert U., Jaenisch G.R., Zscherpel U., Osterloh K., Redmer B. Industrial radiology. Handbook of Technical Diagnostics. Berlin, Heidelberg : Springer, 2013. Pp. 221−247.

11. Kapustin V.I., Osipov S.P. O kriteriyah sravneniya razlichnyh modifikatsiy metodov cifrovoy radiografii [Criteria for comparing different modifications of digital radiography methods]. Kontrol'. Diagnostika ('Testing. Diagnostics'). 2013. No. 12. Pp. 25−32. (rus)

12. Peng R., Yang Y., Ju Y., Mao L., Yang Y. Computation of fractal dimension of rock pores based on gray CT images. Chinese Science Bulletin. 2011. V. 56. No. 31. Pp. 3346–3357.

13. Sidulenko O.A., Kasianov V.A., Kasianov S.V., Osipov S.P. Schelevye i pinhol'nye kollimatory v cifrovoy rentgenografii [Slot and pinhole collimators in digital radiography]. Instruments and Systems: Monitoring, Control, and Diagnostics. 2007. No. 3. Pp. 62−64. (rus)

14. Nedavniy O.I., Maksimenko B.V., Koval' V.D., Osipov S.P. Mnogokanal'niy radiometricheskiy kompleks dlya defektoskopii promyshlennyh izdeliy i stroitel'nyh materialov [Multi-channel radiometric system for flow detecting industrial products and construction materials]. News of Higher Educational Institutions. Construction.1994. No. 12. Pp. 96−99. (rus)

15. Hsieh J. Computed tomography: principles, design, artifacts, and recent advances. Bellingham, WA : SPIE, 2009. 556 p.

16. Osipov S.P., Batranin A.V., Voronova V.S., Shindina A.V. Identifikaciya defektov stal'nyh kanatov po cifrovym radiograficheskim izobrazheniyam [Identification of defects of steel ropes using digital radiographic images]. Tehnologii tehnosfernoy bezopasnosti. 2013. No. 5. 10 p. (rus)

17. Kudyakov A.I., Sarkisov Ju., Kopanitsa N.O., Kasatkina A.V., Prischepa I.A. Foam concrete of increased strength with the thermomodified peat additives. IOP Conf. Series: Materials Science and Engineering. 2015. V. 71. No. 1. 7 p.

18. Wei S., Yiqiang C., Yunsheng Z., Jones M.R. Characterization and simulation of microstructure and thermal properties of foamed concrete. Construction and Building Materials. 2013. V. 47. Pp. 1278–1291.

19. Prischepa I.A., Kudyakov A.I., Kopanitsa N.O., Popov I.I., Ivanova A.B. Syrievaya smes' dlya prigotovleniya penobetona [Raw material mixture for foam concrete]. Pat. Rus. Fed. N 2514069. 2012.


Review

For citations:


Osipov S.P., Klimenov V.A., Batranin A.V., Shtein A.M., Prishchepa I.A. Digital radiography and x-ray computerized tomography in building construction and construction materials science. Vestnik of Tomsk state university of architecture and building. 2015;(6):116-127. (In Russ.)

Views: 818


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 1607-1859 (Print)
ISSN 2310-0044 (Online)