Reinforcement analysis of concrete roof frames of industrial building.
https://doi.org/10.31675/1607-1859-2023-25-3-120-127
Abstract
Purpose: Reinforcement analysis of concrete roof frames of one-storey industrial frame building with respect to the detected corrosion of reinforcement and longitudinal cracks with the opening width of several millimeters in the concrete protective layer.
Methodology: The analysis is performed by using the finite element modeling in the MicroFe software, the developed model of detected damages of the concrete structures, and design solution of the roof frame strengthening.
Research findings: Rationale is given to the lower roof frame strengthening with polymer fiber using two analytical models, namely steel reinforced element and layer material element. The obtained results are then compared.
About the Author
I. I. Podshivalov
Tomsk State University of Architecture and Building
Russian Federation
Russian Federation
Ivan I. Podshivalov, PhD, A/Professor
2, Solyanaya Sq., 634003, Tomsk
References
1. Koyankin A.A., Mitasov V.M. Prefabricated solid building frame and its properties in different life cycles. Vestnik MGSU. 2015; (9): 28–35. (In Russian)
2. Eryshev V.A., Latysheva E.V., Malysh A.S. In situ testing of performance parameters of reinforced concrete structures without physical fracture. Izvestiya KGASU. 2015; 1 (13): 75–79. (In Russian)
3. Zolina T.V. Examination procedure for building residual operation life. Vestnik MGSU. 2014; (11): 98–108. (In Russian)
4. Stupishin L.Yu. Load-bearing capacity of buildings with defects. Promyshlennoe i grazhdanskoe stroitel'stvo. 2017; (10): 39–44. (In Russian)
5. Zolina T.V., Tusnin A.R. Extending of operation life of industrial building. Vestnik MGSU. 2015; (6): 41–49. (In Russian)
6. Stepanova V.F. Corrosion protection of concrete and reinforced concrete structures as a basis for building durability. Promyshlennoe i grazhdanskoe stroitel'stvo. 2013; (1): 13–16. (In Russian)
7. Danilov A.I., Kalugin I.A. Tensile member reinforcement with high-strength fiber polymers. Promyshlennoe i grazhdanskoe stroitel'stvo. 2018; (12): 25–31. (In Russian)
8. Ustinov A.M., Klopotov A.A., Potekaev A.I., Abzaev Yu.A., Plevkov V.S. Digital image correlation of stress-strain state of CFRP surface layers under axial tension. Izvestiya Altaiskogo gosudarstvennogo universiteta. 2018; 1 (99): 58–63. DOI 10.14258/izvasu(2018)1-10 (In Russian)
9. Simakov O.A., Zenin S.A., Kudinov O.V., Osipov P.V. Strength analysis of carbon fiber anchor for external reinforcement. Promyshlennoe i grazhdanskoe stroitel'stvo. 2020; (4): 4–8. (In Russian)
10. Rimshin V.I., Merkulov S.I. Elements of the theory of development of concrete structures with non-metallic composite reinforcement. Promyshlennoe i grazhdanskoe stroitel'stvo. 2015; (5): 38–42. (In Russian)
11. Zolina T.V., Sadchikov P.N. Modelling the industrial building performance with respect to stiffness during operation. Vestnik MGSU. 2012; (10): 69–76. (In Russian)
12. Podshivalov I.I., Plyaskin A.S., Tarasov A.A. Reinforcement of concrete principal and secondary trusses after service damages. Vestnik Tomskogo gosudarstvennogo arkhitekturnostroitel'nogo universiteta – Journal of Construction and Architecture. 2022; 24 (2): 147–160. (In Russian)
Review
For citations:
Podshivalov I.I. Reinforcement analysis of concrete roof frames of industrial building. Vestnik Tomskogo gosudarstvennogo arkhitekturno-stroitel'nogo universiteta. JOURNAL of Construction and Architecture. 2023;25(3):120-127. (In Russ.) https://doi.org/10.31675/1607-1859-2023-25-3-120-127
Views:
156
Email this article 